Tried to flash RCD-510, Now it´s "dead"... - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: Tried to flash RCD-510, Now it´s "dead"... (/showthread.php?tid=21049) |
Tried to flash RCD-510, Now it´s "dead"... - Mex165 - 17-01-2017 So i tried to flash my RCD510 (with 3C8035190__0171.sgo) and after 20min and 35% i got "ERROR"... If anybody have the original file: 3C8 035 190 Radio RCD510 040 0167 Or any other suggestions, that would make me very happy Well just got passed 40min (70%) and "!!!ERROR!!!", so i must be doing something right/wrong?!?! RE: Tried to flash RCD-510, Now it´s "dead"... - rocdeng - 18-01-2017 I didn't update the RCD510 firmware. I remeber there's option you can modified to enable the engineering mode for updating firmware. Have you enable it? RE: Tried to flash RCD-510, Now it´s "dead"... - Mex165 - 18-01-2017 Engineering mode is just for update via usb. With ODIS you "just" flash, but im guessing it´s VERY sensitive and thats why it fails. I will try again today, with some modifications RE: Tried to flash RCD-510, Now it´s "dead"... - Ashraf6119 - 18-01-2017 Did you connect the battery charger to keep the battery voltage stable at 14.4V RE: Tried to flash RCD-510, Now it´s "dead"... - Mex165 - 18-01-2017 Yes, but today i have one extra battery in between and 14.7V. But first attempt only got me to 45%...! So even though it´s still a brick, im still getting past 5-10% that was the "top score" Before. New record!!! 78% This is a mystery!! RE: Tried to flash RCD-510, Now it´s "dead"... - Mex165 - 20-01-2017 Is it even possible to flash with the J2534 directly to the radio? |