K+DCAN and Ediabas help please - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: K+DCAN and Ediabas help please (/showthread.php?tid=21184) Pages:
1
2
|
K+DCAN and Ediabas help please - BMWScoops55 - 22-01-2017 Have been running K+DCAN cable and Ediabas 6.4.3 with standalone ISTA for some time no problem. Now I want to use ENET cable since IM getting more F Cars but 6.4.3 does not do ENET ? Installed patched EDIABAS 7.3.0 but keep getting "vehicle could not be identified" in ISTA vehicle test with K +DCAN and ENET does not show up on ISTA Changing 7.3.0 folder to another name and changing 6.4.3 folder back to EDIABAS makes it all work again on K + DCAN Any help ? RE: K+DCAN and Ediabas help please - Twoone - 22-01-2017 (22-01-2017, 16:58 PM)BMWScoops55 Wrote: Have been running K+DCAN cable and Ediabas 6.4.3 with standalone ISTA for some time no problem.You can use ENET without ediabas directly. Choose ICOM -ENET local network. in VCI settings in Rheingold. RE: K+DCAN and Ediabas help please - BMWScoops55 - 22-01-2017 (22-01-2017, 17:34 PM)Twoone Wrote: You can use ENET without ediabas directly. Choose ICOM -ENET local network. in VCI settings in Rheingold. Tried that. Even before new Ediabas and after "Connection manager" screen pops up and its blank. No cable to select None of the VCI options work with the ENET The cable works fine with ESYS so it is working RE: K+DCAN and Ediabas help please - Twoone - 22-01-2017 (22-01-2017, 17:42 PM)BMWScoops55 Wrote:when you look at connection manager the ENET is connected to the car?(22-01-2017, 17:34 PM)Twoone Wrote: You can use ENET without ediabas directly. Choose ICOM -ENET local network. in VCI settings in Rheingold. Also network card must be set to obtain adres via DHCP RE: K+DCAN and Ediabas help please - BMWScoops55 - 22-01-2017 (22-01-2017, 17:48 PM)Twoone Wrote:(22-01-2017, 17:42 PM)BMWScoops55 Wrote:when you look at connection manager the ENET is connected to the car?(22-01-2017, 17:34 PM)Twoone Wrote: You can use ENET without ediabas directly. Choose ICOM -ENET local network. in VCI settings in Rheingold. Yes, Enet cable plugged in, Ignition on, 25amp charger on car Network IPV4 set to "obtain IP automatically" Card set to 196.254.1.1 yields same result Tried 2 Exx cars and 2 Fxx cars - same result ESYS works 100% ISTA on Edbabas 6.43 works with K+DCAN, enet gives same blank result Also Windows 7 Anti VIrus + Firewall disabled EDIT Sorry, im an Idiot Had Rheingold open before plugging ENET cable into car. Closing Rheingold then plugging ENET in then restarting Rheingold brings up the ENET cable Ediabas 6.43 then give "Configuration error) But 7.3.0 set to ENEt works Atleast on an F car, will try E soon Still dont know why the k+DCAN wont work with 7.3.0 EDIT2 ENET working on Fxx but not Exx cars Connection manager blank on Exx RE: K+DCAN and Ediabas help please - Robocop25 - 22-01-2017 (22-01-2017, 17:57 PM)BMWScoops55 Wrote: You can use E-NET only from F-series up. RE: K+DCAN and Ediabas help please - BMWScoops55 - 22-01-2017 (22-01-2017, 19:47 PM)Robocop25 Wrote:(22-01-2017, 17:57 PM)BMWScoops55 Wrote: Thanks Still trying to get k+DCAN wont work with 7.3.0 RE: K+DCAN and Ediabas help please - mattydr67 - 22-01-2017 Check the com port in 6.4.3 For your k-dcan in Obd.ini Usually is set on com 1 Set it in 7.3.0 ( Usually its set on com 9) as Well Or set your k-dcan com port on 9 in Device Manager Good luck RE: K+DCAN and Ediabas help please - Enabled - 23-01-2017 The patched EDIABAS is best to use ONLY with ISTA-P Loader/ICOM emulator. I have not had success using it with the other regular apps. Install the unpatched ediabas from BMW Standard Tools 2.12, and it will work. (*or just replace patched ediabas\bin\ files with unpatched files found in Rheingold folders) RE: K+DCAN and Ediabas help please - BMWScoops55 - 23-01-2017 (22-01-2017, 21:19 PM)mattydr67 Wrote: Check the com port in 6.4.3 For your k-dcan in Obd.ini Had everything set to Com 1 and it wasnt working Changed everything to Com 9 and all is well. Thanks (23-01-2017, 16:10 PM)Enabled Wrote: The patched EDIABAS is best to use ONLY with ISTA-P Loader/ICOM emulator. Have done so, thanks The patched one was also working, but did it incase |