+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57)
+---- Thread: Consult 3 with delphi vci 100251 (/showthread.php?tid=21293)
Consult 3 with delphi vci 100251 - malikmub - 26-01-2017
Dear all,
I hope you are well,
I've question regarding consult 3 .
Can i use consult 3 with my delphi vci 100251 (cdp + pro)?
Thanx
RE: Consult 3 with delphi vci 100251 - gsmunlock - 26-01-2017
Forget it, nissan consult3 works with own adapter.
RE: Consult 3 with delphi vci 100251 - Woogie - 27-01-2017
I use a renault allaince VI interface with nissan consult software
RE: Consult 3 with delphi vci 100251 - malikmub - 27-01-2017
(27-01-2017, 00:36 AM)Woogie Wrote: I use a renault clip interface with nissan consult software
What about the drivers. Hw u configer it
RE: Consult 3 with delphi vci 100251 - sparky001 - 27-01-2017
Hey
Cantiecar works with CS3+. Bit buggy, but works
Cheers
RE: Consult 3 with delphi vci 100251 - malikmub - 28-01-2017
What about vci 100251 (cdp + pro)
RE: Consult 3 with delphi vci 100251 - tamnuni - 28-01-2017
(27-01-2017, 00:36 AM)Woogie Wrote: I use a renault clip interface with nissan consult software
hi
how did you make it work ?
did you change the settings or does it work by itself
thank's
RE: Consult 3 with delphi vci 100251 - SuperStrips - 14-02-2017
I know you have to edit an .ini file with whatever name your interface's name is in the registry.
But as far as I know, no interface will give you datastream, only codes.
But if I'm wrong, please, by all means correct me.
RE: Consult 3 with delphi vci 100251 - rs@chip - 14-02-2017
I tested Nissan consult with actia vci work good...
RE: Consult 3 with delphi vci 100251 - Woogie - 14-02-2017
If your tool has the serial RLT02 or RLT2002 then it won't work with Nissan Consult III software. Consult software will only work under XP install