+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: 6WA Retrofit on f10 problem (/showthread.php?tid=21375)
6WA Retrofit on f10 problem - Gregor - 28-01-2017
Hello
I put a kombi 6wa on bmw f10, changed vin and kilometers in eeprom and added 6wa to FA zeitkrit 0311 but I can not encode it into the car.
During attempts to detect caf for swe their error.
Kombi comes from BMW f06
Tell someone how to fix it?
RE: 6WA Retrofit on f10 problem - yarickoff - 29-01-2017
Update soft in your 6WA via ESYS
RE: 6WA Retrofit on f10 problem - 840i - 29-01-2017
Edit : 6WA my bad...
RE: 6WA Retrofit on f10 problem - Gregor - 29-01-2017
Car i-level is F010-16-03-502,milage in 6wa were lower than in the car.Not I changed to 0km.
RE: 6WA Retrofit on f10 problem - nguyennhatquang - 29-01-2017
Used cluster all time has problem..
as i heard the VIN still store somewhere
u need to flash your 6WA with your Esys..if it working then done..
RE: 6WA Retrofit on f10 problem - temsky740 - 29-01-2017
Try to flash. But first of all make right TAL.
RE: 6WA Retrofit on f10 problem - Gregor - 29-01-2017
I've done it before and never had a flash was enough encoding.
In this case, I'll flash with ESYS.
RE: 6WA Retrofit on f10 problem - temsky740 - 29-01-2017
(29-01-2017, 19:38 PM)Gregor Wrote: I've done it before and never had a flash was enough encoding.
In this case, I'll flash with ESYS.
Make attention for HWEL and BTLD after make TAL.
RE: 6WA Retrofit on f10 problem - Nackapatz - 31-05-2017
Any updates? I also have the problems.