Ultimate Ediabas/ISTA+ voltage control V3 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Ultimate Ediabas/ISTA+ voltage control V3 (/showthread.php?tid=21543) |
RE: Ultimate Ediabas/ISTA+ voltage control V3 - tarantinov - 05-03-2019 (03-03-2019, 21:06 PM)Node Wrote: tarantinov, I made an experimental and untested build for XP found in XP-experimental directory. I don't have any XP to test so its up to you if you want. that would be great! ready to test! RE: Ultimate Ediabas/ISTA+ voltage control V3 - Lux - 10-03-2019 (07-04-2018, 04:16 AM)motorberserker Wrote:(06-04-2018, 08:18 AM)Node Wrote:(06-04-2018, 02:06 AM)motorberserker Wrote:(31-03-2018, 16:51 PM)Node Wrote: This solution is not designed to replace dlls starting with X in ediabas. I have the same problem... I need a simulated voltage to start "execute measures plan" when I use an enet cable... There is a solution to do this? please... RE: Ultimate Ediabas/ISTA+ voltage control V3 - Bimmer540 - 11-03-2019 Is possible make an Update to v4.16.22? RE: Ultimate Ediabas/ISTA+ voltage control V3 - Node - 11-03-2019 Support for v4.16.22 added. RE: Ultimate Ediabas/ISTA+ voltage control V3 - e46ad - 11-03-2019 (11-03-2019, 23:41 PM)Node Wrote: Support for v4.16.22 added. Thanks, Node your speed is amazing bro, appreciated + Rep, and Thanks RE: Ultimate Ediabas/ISTA+ voltage control V3 - kklobo - 27-03-2019 I using 4.09.13 I put obd32.dll and obd32.ebas.dll in c/ediabas c/rehingold/ediabas and c/rehingold/testergui/ Rename as instructions and still not showing values using k d can cable maybe something I must change with obd.ini? RE: Ultimate Ediabas/ISTA+ voltage control V3 - Node - 28-03-2019 Support for v4.16.30 added. (27-03-2019, 08:28 AM)kklobo Wrote: I using 4.09.13 I put obd32.dll and obd32.ebas.dll in c/ediabas c/rehingold/ediabas and c/rehingold/testergui/ No other changes required. Put the files as described and run exe - that's all. RE: Ultimate Ediabas/ISTA+ voltage control V3 - pavjayt - 30-03-2019 (28-03-2019, 20:12 PM)Node Wrote: P.S. This voltage control utility is not designed to and will not influence voltages reported by ICOM. Does this mean that we cant use this with ICOM A2 that shows lower voltage readings than what the real voltage is at the engine bay terminals while everything is ON? If not, is there any other utility that we can use with ICOM? thanks RE: Ultimate Ediabas/ISTA+ voltage control V3 - TsiliR53 - 09-04-2019 Seems we have hacked Ista+ with a voltage control NODE software but has anyone managed or do they know of a way to mimic voltage for istap? https://youtu.be/et9o0sFWdWQ The YouTube video implies that kdcan utility 2.0 can. RE: Ultimate Ediabas/ISTA+ voltage control V3 - Node - 09-04-2019 Support for v4.16.40 added. |