Scheme simens read - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Scheme simens read (/showthread.php?tid=21921) |
Scheme simens read - plam1972 - 17-02-2017 Hi, I have read citroen berlingo 2.0HDI 90hp simens with galleto but no scheme 28pin ground. Can someone please help me. Тhanks in advance. This instruction is galleto RE: Scheme simens read - Gabriel130592 - 17-02-2017 (17-02-2017, 08:50 AM)plam1972 Wrote: Hi, For more information you have to look at the type of ECU .. Siemens SID 801..801A ... 802 .. Galletto wants you to have the ECU, to look for the 29F and solder a cable on the pin28 and that cable to ground (negative). I recommend that you put a switch on the cable. The steps would be. 1. Contact removed & Ground switch Set ON. 2. Set contact position ON. 3. Ground switch OFF Proceed to reading. Greetings and thanks! If my message has liked or helped you, please select Reputation & Thanks! |