CarTechnoloGY
Fiat Stilo 1.6 gasoline injector removal instruction need - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Fiat - Alfa Romeo (https://cartechnology.co.uk/forumdisplay.php?fid=82)
+---- Thread: Fiat Stilo 1.6 gasoline injector removal instruction need (/showthread.php?tid=21939)

Fiat Stilo 1.6 gasoline injector removal instruction need - Joda - 17-02-2017

Hi there!
How can I remove the injectors from Fiat Stilo 1.6 year 2001 gasoline engine?
Must I remove the whole intake manifold?

I can see the fuel rail under the intake manifold.

Or Is it enough to separate the plastic part of the intake manifold from the
metal part and take out the fuel rail with the injectors?

Here is the picture about the engine:
[Image: c89d226edc84d5d0b68f954913b9819f.jpg]

Thanks for any advice.

RE: Fiat Stilo 1.6 gasoline injector removal instruction need - billarisa - 17-02-2017

(17-02-2017, 19:07 PM)Joda Wrote:  Hi there!
How can I remove the injectors from Fiat Stilo 1.6 year 2001 gasoline engine?
Must I remove the whole intake manifold?

I can see the fuel rail under the intake manifold.

Or Is it enough to separate the plastic part of the intake manifold from the
metal part and take out the fuel rail with the injectors?

Here is the picture about the engine:
[Image: c89d226edc84d5d0b68f954913b9819f.jpg]

Thanks for any advice.

Hi mate .

Here is with pic how to remove injectors from this car .

RE: Fiat Stilo 1.6 gasoline injector removal instruction need - Joda - 17-02-2017

Thank's bro!
This is exactly what I searched for.

From what software you extracted this pictures?

Thank's

RE: Fiat Stilo 1.6 gasoline injector removal instruction need - billarisa - 17-02-2017

(17-02-2017, 19:34 PM)Joda Wrote:  Thank's bro!
This is exactly what I searched for.

From what software you extracted this pictures?

Thank's

From Fiat elearn .

Good luck .

RE: Fiat Stilo 1.6 gasoline injector removal instruction need - Joda - 17-02-2017

What do you think about this problem on my fiat:
The car cranks well and is running but consumes to much fuel.
From the exhaust coming white maybe light gray exhaust gas.
When I check whit diag tool I have two DTC set:
- P0203
- P0141
Checked the injectors resistance and they are between 12-17 Ohm
When I checked whit oscilloscope the injector wires I have a problem
on the injector no 1 from the left side when I stand in front of the car.
Here are the signal's:
Bad signal, signal have some sort of noise.
[Image: YHiMsXb.jpg]

Good signal from other injectors include the
injector which is described by the P0203 DTC, no noise.
[Image: JOYU9oa.jpg]

I can not figure out why is this smoke on the exhaust...
Here is my smoke machine:
[Image: tJkB1yX.jpg]

Any idea?
Could one of that two DTC codes cause this smoke monster?

RE: Fiat Stilo 1.6 gasoline injector removal instruction need - pagautas - 19-02-2017

Maybe coolant level geting lower?

Sent from my Nexus 5X using Tapatalk

RE: Fiat Stilo 1.6 gasoline injector removal instruction need - Joda - 19-02-2017

Checked. No coolant level is moving. The smell of the exhaust gas is like if too much gasoline is existing.

Sent from my GT-I8260 using Tapatalk

RE: Fiat Stilo 1.6 gasoline injector removal instruction need - billarisa - 19-02-2017

DTC P0141 = Oxygen (Lambda) Sensor (O2S) 2

check if your sensor L working properly.

RE: Fiat Stilo 1.6 gasoline injector removal instruction need - Joda - 28-02-2017

I know. The heating element is in trouble. I will change the o2 sensor. But I have also a problem with ecu. The ecu pin50 in the B connector is in short. The driver ic is actually in short inside the ecu which is the L9135PD. I'm on the way to solve this and I will post the result.

Sent from my GT-I8260 using Tapatalk