BMW ITool Radar - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW ITool Radar (/showthread.php?tid=2221) |
RE: BMW ITool Radar - Modded e30 - 04-09-2014 Error: File not found. Re-upload please.. RE: BMW ITool Radar - Bimmer - 08-09-2014 (04-09-2014, 07:30 AM)Modded e30 Wrote: Error: File not found. Fixed Cheers!! Please press the and buttons if you found this helpful. RE: BMW ITool Radar - larrybml - 12-07-2015 Last link still doesn't work. Please help, I need to make it work on win 7 64bit RE: BMW ITool Radar - ruben_17non - 12-07-2015 (12-07-2015, 06:34 AM)larrybml Wrote: Last link still doesn't work. Reupload http://cartechnology.co.uk/showthread.php?tid=8793 RE: BMW ITool Radar - BMWE92M3 - 07-12-2016 Hello everyone Well for me it does not work I'm getting an error 193 which says Failed to Load Java VM library: C\Program Files\Java\jre1.8.0_101\Bin\Server\jvm.dll So the Java version I have is the latest but either the Itool Radar is no compatible or I'm missing jvm.dll does anybody got this issue. I need this cause my ICOM does require new firmware to work properly and without ITool I cannot see the IP. Thanks for any help in advance. RE: BMW ITool Radar - 530d - 07-12-2016 1. Install Java (jre-6u13-windows-i586-p.exe). 2. Copy "ITool Radar" folder to C:\program files (x86)\ 3. Run IToolRadar.exe to start the program (accept any firewall warning messages). RE: BMW ITool Radar - McJack - 10-01-2017 You have to install the 32-bit JRE to get it work. If only the 64-bit JRE is installed you will get the error above. RE: BMW ITool Radar - dkoumentos - 12-03-2017 I am connected to ISTA/d using a wirelessly connection with ICOM A2 unit. When i use itoolradar i can get the IP but after a while 30-40 seconds the itoolradar stops showing the ICOM's IP (connection is not affected in ISTA/d or any other program using that moment like ncsexpert, INPA etc). Any thoughts why itoolradar doesn't show ip address all the time If i unplug and plug the ICOM i will be able to see the IP address again for a while and then dissapears again. Is it something to adjust in my Access Point? Regards Dimitris RE: BMW ITool Radar - blackbm5xx - 28-04-2017 (07-12-2016, 14:48 PM)BMWE92M3 Wrote: Hello everyoneHello Guys, i´ve the same problem. Can somebody help me? I tested java X32, X64 and so else but have the same problem Thanks for help RE: BMW ITool Radar - codemybmw - 28-04-2017 Use easyconnect. Much easier and little to no config. |