+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Power shut down while programming (/showthread.php?tid=22677)
Power shut down while programming - pdc - 16-03-2017
Hi Guys
i was programing a combox with ista P 3.59 from bmw f10 535d,and it happen a power shutdown on my garage ,and consequently the volts lowered from 13,8 to 12,1 .After some seconds the programming procedure aborted and now the car does not work.Someone as experienced the same problem?.
Now the car does not comunicate and ista shows 0V on terminal 15 .
What is the recomended procedure?
Thanks in advance.
RE: Power shut down while programming - dracon - 16-03-2017
(16-03-2017, 14:39 PM)pdc Wrote: Hi Guys
i was programing a combox with ista P 3.59 from bmw f10 535d,and it happen a power shutdown on my garage ,and consequently the volts lowered from 13,8 to 12,1 .After some seconds the programming procedure aborted and now the car does not work.Someone as experienced the same problem?.
Now the car does not comunicate and ista shows 0V on terminal 15 .
What is the recomended procedure?
Thanks in advance.
Did you try a battery reset? Pull the cables from the battery for about 30 minutes and then reconnect.
Power shut down while programming - cryptocar - 17-03-2017
(16-03-2017, 15:15 PM)dracon Wrote:(16-03-2017, 14:39 PM)pdc Wrote: Hi Guys
i was programing a combox with ista P 3.59 from bmw f10 535d,and it happen a power shutdown on my garage ,and consequently the volts lowered from 13,8 to 12,1 .After some seconds the programming procedure aborted and now the car does not work.Someone as experienced the same problem?.
Now the car does not comunicate and ista shows 0V on terminal 15 .
What is the recomended procedure?
Thanks in advance.
Did you try a battery reset? Pull the cables from the battery for about 30 minutes and then reconnect.
In my experience 30s is sufficient but I go longer if I'm not rushing.
Sent from my iPhone using Tapatalk Pro
RE: Power shut down while programming - pdc - 17-03-2017
Solved
Today i starter a new session of ista p and it recovered the all car without any problem.
It seems the car or ista saved all the data and recovered everything.
I did not disconnect the battery.
Thanks to everybody that try to help
(17-03-2017, 01:04 AM)cryptocar Wrote:(16-03-2017, 15:15 PM)dracon Wrote:(16-03-2017, 14:39 PM)pdc Wrote: Hi Guys
i was programing a combox with ista P 3.59 from bmw f10 535d,and it happen a power shutdown on my garage ,and consequently the volts lowered from 13,8 to 12,1 .After some seconds the programming procedure aborted and now the car does not work.Someone as experienced the same problem?.
Now the car does not comunicate and ista shows 0V on terminal 15 .
What is the recomended procedure?
Thanks in advance.
Did you try a battery reset? Pull the cables from the battery for about 30 minutes and then reconnect.
In my experience 30s is sufficient but I go longer if I'm not rushing.
Sent from my iPhone using Tapatalk Pro