+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Solved FRM 3 PROBLEM TO UPDATE SW VIA WINKFP (/showthread.php?tid=22701)
Solved FRM 3 PROBLEM TO UPDATE SW VIA WINKFP - krug - 17-03-2017
Hi to all. Looking for some advice with my problem.
The story is : trying to update FRM 3 WINkfp offer new zb number, I'm pressing OK program. So first line goes to 100% and then in 20-30 sec fault popping up see pictures. Tried expert mode, same fault, different settings in WINkfp but ended up all the time with the same faults.
Maybe someone resolved that kind of problem before and would be able to point on what I'm doing wrong.
Thanks in advance
RE: FRM 3 PROBLEM TO UPDATE SW VIA WINKFP - AutoExe3219 - 18-03-2017
(17-03-2017, 12:53 PM)krug Wrote: Hi to all. Looking for some advice with my problem.
The story is : trying to update FRM 3 WINkfp offer new zb number, I'm pressing OK program. So first line goes to 100% and then in 20-30 sec fault popping up see pictures. Tried expert mode, same fault, different settings in WINkfp but ended up all the time with the same faults.
Maybe someone resolved that kind of problem before and would be able to point on what I'm doing wrong.
Thanks in advance
check gateway module work fine or not?
RE: FRM 3 PROBLEM TO UPDATE SW VIA WINKFP - krug - 18-03-2017
(18-03-2017, 03:03 AM)AutoExe3219 Wrote:(17-03-2017, 12:53 PM)krug Wrote: Hi to all. Looking for some advice with my problem.
The story is : trying to update FRM 3 WINkfp offer new zb number, I'm pressing OK program. So first line goes to 100% and then in 20-30 sec fault popping up see pictures. Tried expert mode, same fault, different settings in WINkfp but ended up all the time with the same faults.
Maybe someone resolved that kind of problem before and would be able to point on what I'm doing wrong.
Thanks in advance
check gateway module work fine or not?
It works fine 100%
RE: FRM 3 PROBLEM TO UPDATE SW VIA WINKFP - Node - 18-03-2017
Is engine running while you are trying? Programming is usually not possible with the engine running.
RE: FRM 3 PROBLEM TO UPDATE SW VIA WINKFP - krug - 18-03-2017
(18-03-2017, 12:30 PM)Node Wrote: Is engine running while you are trying? Programming is usually not possible with the engine running.
I'm doing on bench, without a car. Got cas+key & JBE.
RE: FRM 3 PROBLEM TO UPDATE SW VIA WINKFP - cubica - 18-03-2017
Did you try to read motorola inside? P, D flash + ee? possible damaged.
cuby
RE: FRM 3 PROBLEM TO UPDATE SW VIA WINKFP - krug - 19-03-2017
(18-03-2017, 12:30 PM)Node Wrote: Is engine running while you are trying? Programming is usually not possible with the engine running.
It was ee damaged, I have changed ee to good one. But the thing is is not a first one FRM 3 I having problems to update.
