Solved ✔ CDC (CD changer) Preparation Wiring Help! - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ CDC (CD changer) Preparation Wiring Help! (/showthread.php?tid=22806)

CDC (CD changer) Preparation Wiring Help! - CMOSUK - 21-03-2017 HI I have the cd changer preparation wiring in my E90, I'm trying to set up a usb/bluetooth through Mulf2 high svs module, I'm trying to power up the module through the cd changer prep wiring as it has the power and most cables. Iv set up the most and can see the red light which means it's working, have also put a most loop terminator tp close the most loop and it works fine. Only issue I'm have is the power cables don't seem to be giving the 12v when tested through a multimeter. Is it a case it is not enabled or I have to complete the wiring through junction box? Much help appreciated. Sent from my D5803 using Tapatalk RE: CDC (CD changer) Preparation Wiring Help! - SweetBMW - 21-03-2017 You dont give any specific information about the car, other than its an E90. So according to the diagram for the CD changer the fuse number is: 34 Check this and see if its there or not. This is taken from a 3\2007 E90 320d. RE: CDC (CD changer) Preparation Wiring Help! - CMOSUK - 21-03-2017 Hi sorry it's a 2010 UK efficient dynamics 320d Sent from my D5803 using Tapatalk CDC (CD changer) Preparation Wiring Help! - CMOSUK - 22-03-2017 That's my fuse box so I take it I don't have f34 amd that's why I'm not getting power! Sent from my D5803 using Tapatalk RE: CDC (CD changer) Preparation Wiring Help! - SweetBMW - 22-03-2017 Orrect. If you look closely the slot is prepared to accept a fuse . put it in RE: CDC (CD changer) Preparation Wiring Help! - CMOSUK - 24-03-2017 Hi I tried to put the fuse in but it seems there are pins already if u look closely at pic it seems a fuse can't go in. Sent from my D5803 using Tapatalk RE: CDC (CD changer) Preparation Wiring Help! - CMOSUK - 25-03-2017 Hi Just an update, it was fuse 19, after checking the fuse chart as to where each fuse goes I figured it out. This is for an E90 2010. Sent from my D5803 using Tapatalk