Corsa d steering wheel calibration fail - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59) +---- Thread: Corsa d steering wheel calibration fail (/showthread.php?tid=22810) |
Corsa d steering wheel calibration fail - sakroda - 21-03-2017 Hi I changed streering wheel column but i got error about calibration and i did calibration with tech2 and opcom no success.. tech2 says : "volt has to be range 1,75-2,15 around but my volt is 1.51 that why tech2 can t calibrate.. signal cornering is not close from CIM you have to turn it off manually I changed steering wheel column for my AFL project.. so eps is second hand maybe it s broken and when you turn left or right CIM does not close the signal if you full turn right or left it closes.. error code is C0460-42 same error tech 2 and opcom..and i had to change with old one..is there a special technique for calibration..by the way my car has not esp function but steering wheel column esp function.. thanks |