Vag-com lead ? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: Vag-com lead ? (/showthread.php?tid=22843) |
Vag-com lead ? - tonymc44 - 22-03-2017 Hi all total newbie here i am looking for obd2 lead to fit a 2007 seat ibiza fr registered September 2006 i was looking at a vag409 but dosent go to that year. then i was looking at the vag.can but that only goes up to the start of 2006 very confused just looking for a cheap 1 from ebay for now. that will run vag-com or similar through laptop hope you can help thanks tony RE: Vag-com lead ? - ROD-BENDERS - 22-03-2017 (22-03-2017, 10:43 AM)tonymc44 Wrote: Hi all total newbie here Tony what are you looking to do with this cable exactly, if I know your plans I may be able to help in a bit more detail mate RE: Vag-com lead ? - tonymc44 - 22-03-2017 (22-03-2017, 10:57 AM)Buzzard Wrote:hi thanks for reply for diagnostics side like reading codes turning sensors off things like that basic stuff i think thanks again(22-03-2017, 10:43 AM)tonymc44 Wrote: Hi all total newbie here RE: Vag-com lead ? - ROD-BENDERS - 22-03-2017 Ok well you should look at eu vcds cable (ross tech clone) you can find updateable version in the selling section will do whatever you need. Or, you could buy yellow head Launch easydiag adapter, and get full all cars software activated for your android phone/tablet is good tool. check out the markety place Sent from my SM-N910F using Tapatalk RE: Vag-com lead ? - tonymc44 - 22-03-2017 (22-03-2017, 11:40 AM)Buzzard Wrote: Ok well you should look at eu vcds cable (ross tech clone) you can find updateable version in the selling section will do whatever you need.thanks will have a look cheers tony RE: Vag-com lead ? - ROD-BENDERS - 22-03-2017 (22-03-2017, 12:31 PM)tonymc44 Wrote:(22-03-2017, 11:40 AM)Buzzard Wrote: Ok well you should look at eu vcds cable (ross tech clone) you can find updateable version in the selling section will do whatever you need.thanks will have a look cheers tony No problem Tony |