BMW F11 Dynamic Damper Control Issue - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW F11 Dynamic Damper Control Issue (/showthread.php?tid=22887) |
BMW F11 Dynamic Damper Control Issue - mall - 23-03-2017 Hi all, I have this car and I can see that it is so much higher than I would like, specially in the front axle. I have done a test with Rheingold and adjust setting but it is still too higher. I set a different values for front axle (I say to rheingold that it is tall than I did measure but nothing change). The rear axle I can change value. When I am trying to do a setting, rheingold says to me that higher should be 642 in the front and 644 for the rear axle. Is there any way to change thoses values? How I can put lower front axle? Thanks in advance RE: BMW F11 Dynamic Damper Control Issue - olaf - 26-03-2017 Since the F11 has air springs only on the rear, you can not adjust the front because is fitted with steel springs... |