+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Any one Tunes a BMW F10 M5 (/showthread.php?tid=23003)
Pages:
1
2
Any one Tunes a BMW F10 M5 - Emmy - 27-03-2017
Hi fellows did any of you tuned their f10 m5? i heared some people does it wo drilling the ecu? and what tools do we need?
Any one Tunes a BMW F10 M5 - Powerlab - 27-03-2017
I tuned many of them.
Drilling is not a good idea for that kindda ecus for me.
I used CMD with FXX tool.
RE: Any one Tunes a BMW F10 M5 - Emmy - 27-03-2017
(27-03-2017, 20:14 PM)serencebey Wrote: I tuned many of them.why does people drill them if there is a way arround?
Drilling is not a good idea for that kindda ecus for me.
I used CMD with FXX tool.
i have bdm100 xprogm and gellatto 4 a china, any way i can do it my self?
RE: Any one Tunes a BMW F10 M5 - nymike - 28-03-2017
I have cmd too...best tool for those ecu.NYC
RE: Any one Tunes a BMW F10 M5 - Stiffmaster - 28-03-2017
I'm in the hometown of BMW - munic
Available are CMD and X17 - both with f-series plugin
RE: Any one Tunes a BMW F10 M5 - Milchmann - 29-03-2017
It is possible to do f-series with cmd by obd?!
RE: Any one Tunes a BMW F10 M5 - Stiffmaster - 29-03-2017
After unlocking in Bootmode - yes.
RE: Any one Tunes a BMW F10 M5 - Emmy - 29-03-2017
Any one knows how to unlock in boot mode?
RE: Any one Tunes a BMW F10 M5 - Stiffmaster - 29-03-2017
CMD does it automatically.
But it won't help you as you need CMD too for writing over OBD (Ethernet protocol) to make correct checksums.
With your tools, reading/writing is not possible.
None of the tools can read password or can calculate checksum
Can make you 690HP, 860Nm tested tune. If you like with dyno protocol.
RE: Any one Tunes a BMW F10 M5 - Emmy - 29-03-2017
(29-03-2017, 15:38 PM)Stiffmaster Wrote: CMD does it automatically.
But it won't help you as you need CMD too for writing over OBD (Ethernet protocol) to make correct checksums.
With your tools, reading/writing is not possible.
None of the tools can read password or can calculate checksum
Can make you 690HP, 860Nm tested tune. If you like with dyno protocol.
local tuners asking arround 2k for a tune i was wondering if there was a tool for the price range where i could do it my self