Hyundai H1 2.5 TDI error code P0600 ? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Hyundai - Kia (https://cartechnology.co.uk/forumdisplay.php?fid=60) +---- Thread: Hyundai H1 2.5 TDI error code P0600 ? (/showthread.php?tid=23062) |
Hyundai H1 2.5 TDI error code P0600 ? - ihka - 29-03-2017 The car starts only when the scanner erase a fault code P0600. When the car is shut down so it does not start up without connecting the scanner. Help! RE: Hyundai H1 2.5 TDI error code P0600 ? - Remap Ross - 29-03-2017 (29-03-2017, 18:33 PM)ihka Wrote: The car starts only when the scanner erase a fault code P0600. When the car is shut down so it does not start up without connecting the scanner. Help!no comunnication with ecm have you checked these? Faulty Engine control Module (ECM) Engine control Module(ECM) harness is open or shorted Engine control Module (ECM) cicuit poor electricl connection Low battery voltage |