+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ XProg noob question (/showthread.php?tid=23912)
Solved ✔ XProg noob question - tronico - 30-04-2017
How long should take the "security bypass..." when trying to read a desoldered Motorola HC05B6 (mask 0F10V or 3D33J) in xprog adapter? (XProg-m v5.0)
Thank You for the answers advance!
br, tronico
RE: XProg noob question - loki954 - 30-04-2017
(30-04-2017, 12:50 PM)tronico Wrote: How long should take the "security bypass..." when trying to read a desoldered Motorola HC05B6 (mask 0F10V or 3D33J) in xprog adapter? (XProg-m v5.0)
Thank You for the answers advance!
br, tronico
it will be momentarily
RE: XProg noob question - paskuale - 30-04-2017
+1
it is very very fast!
RE: XProg noob question - zmann - 01-05-2017
Your problem can be you're using PC 1-002-0004 adapter (clone, PLCC52). It never work for me but if you reconfigure the adapter to be PC 1-002-0005 (HC05 QFP64), it must work. The configuration settings are the wiring and resistor to some of those 26-pin header. If you have both of the adapters, compare and rewire them.