ISTA 4.05.31 Voltage Control tool - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA 4.05.31 Voltage Control tool (/showthread.php?tid=24608) |
ISTA 4.05.31 Voltage Control tool - beemerboy88 - 25-05-2017 ISTA 4.05.31 Voltage Control. Simulates voltage/ignition of connected interface. ICOM, KDCAN etc. password: beemerboy88 Install Instructions: Unblock archive and extract files to \testergui\bin\release. Put voltage tool on desktop (or any location). How to use: Start ISTA (if there are any problems, try running as admin). Run voltage control tool. Start session. Notes: HW check disabled. Change screen position of voltage tool by dragging it using top left corner. Update: NOFASTA version added. RE: ISTA 4.05.31 Voltage Control tool - dstrickland - 04-06-2017 Could we incorporate a hotkey into this that would toggle it off then back on to simulate a terminal change for users that use KDCANs with Ista-D? This would allow us to have it running in the background & hit the hot key when we Ista ask for a terminal change. RE: ISTA 4.05.31 Voltage Control tool - ReDFiRe - 08-08-2017 Can you send me voltage controller for that version. Thanks RE: ISTA 4.05.31 Voltage Control tool - Dren1977 - 08-08-2017 (08-08-2017, 00:47 AM)ReDFiRe Wrote: Can you send me voltage controller for that version. Thanks http://cartechnology.co.uk/showthread.php?tid=21543 RE: ISTA 4.05.31 Voltage Control tool - sixcode - 16-09-2017 Links are dead, can someone re up please RE: ISTA 4.05.31 Voltage Control tool - Bimmer540 - 16-09-2017 (16-09-2017, 13:20 PM)sixcode Wrote: Links are dead, can someone re up please http://cartechnology.co.uk/showthread.php?tid=21543&highlight=node |