+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: OPel zafira edc16c39 dpf (/showthread.php?tid=24888)
OPel zafira edc16c39 dpf - fisekovic - 06-06-2017
Is it possible to get good dpf off file from this partial obd read form zafira 1.9 74kw edc16c39 ?
If someone can do it manual solution, please don't ecusafe, volta or asc
tnx
RE: OPel zafira edc16c39 dpf - viteq - 06-06-2017
Here you have a file without dpf
RE: OPel zafira edc16c39 dpf - fisekovic - 06-06-2017
Mate i can do it in ASC too, please i asked if someone can do manual solution and is it enough read for DPF off....
RE: OPel zafira edc16c39 dpf - Remap Ross - 06-06-2017
What tool you use?
RE: OPel zafira edc16c39 dpf - fisekovic - 06-06-2017
I read with kess, as i could not get help i did ASC remover solution . Car had all sensors ok and just occasional dpf saturation error and occasional (rare) power loss.
Now i flashed ASC solution and i still getting data mesuring blocks from temp and pressure sensor normal but saturation % messuring data is going crazy it sits around 400-500% and going even 1200% but car runs perfectly normal without any problems (about 50km driven), also i must say DPF is not removed physicly, he will remove it tomorrow.
What do you think about solution? it same file of course Viteq posted above. Tnx alot
RE: OPel zafira edc16c39 dpf - Remap Ross - 06-06-2017
Sounds to me like before you reflashed the dpf off file you did not reset all sensors and ash content.then flash in dpf off....or did you do this?as not sure what version of asc your using but that solution does work with kess as tool...also once dpf of you will still get reading on obd but never regeneration. Hope this helps if not give me more info and we explore further
RE: OPel zafira edc16c39 dpf - fisekovic - 07-06-2017
I did reset and ash 0 was after flashing . I was just wondering is it normal to get reading from sensors like pressure etc... ash % is showing some random numbers now but i also read on some other forum that it can be normal for this solution and car won't go regen or limp again and this is good solution.
Tnx for help
RE: OPel zafira edc16c39 dpf - Remap Ross - 07-06-2017
Yes it is normal ....but also you set ash to zero before flashing
RE: OPel zafira edc16c39 dpf - alex68 - 07-06-2017
(07-06-2017, 06:40 AM)Remap Ross Wrote: Yes it is normal ....but also you set ash to zero before flashing
(Clap)(Clap)(Clap) yes