+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: 0261207423 Opel/valaux fault unit me7.6.1 (/showthread.php?tid=24928)
0261207423 Opel/valaux fault unit me7.6.1 - RAMON31 - 07-06-2017
Hello good afternoon, I have this opel corsa 1.2 petrol engine of 2002. when reading failure comes internal drive failure.
Upload the image obtained by galleto 4 to see if someone tests it and corrects me if there is something wrong. Or does an immobilizer off
RE: 0261207423 Opel/valaux fault unit me7.6.1 - RAMON31 - 08-06-2017
Does anyone know how to clone this unit with gallet 4 without obd2 ?, ie directly on the drive?
RE: 0261207423 Opel/valaux fault unit me7.6.1 - dil6222 - 08-06-2017
(08-06-2017, 07:35 AM)RAMON31 Wrote: Does anyone know how to clone this unit with gallet 4 without obd2 ?, ie directly on the drive?
Hello yes you can clone with mpps etc and you can just pinout with wires directly to ecu doesn't have to be through obd I will post wiring diagram for you shortly
Also where you from? I have a few of these ecus and can do programming etc
RE: 0261207423 Opel/valaux fault unit me7.6.1 - RAMON31 - 08-06-2017
Thank you! I am from Spain.
I have 4 Chinese gallet and Chinese carprog
RE: 0261207423 Opel/valaux fault unit me7.6.1 - RAMON31 - 08-06-2017
Hey, the diagram? please jeje
RE: 0261207423 Opel/valaux fault unit me7.6.1 - dil6222 - 11-06-2017
(08-06-2017, 11:29 AM)RAMON31 Wrote: Hey, the diagram? please jeje
Here we go shouldn't need the relay just pinout appropriate power and Kline let me know how you get on? I'll also check if I have this ecu kicking about then i will also try read on bench
look for your ecu on document below http://www.codecard.lt/files/Manuals/ECU/CARPROG%20Opel%20ECU%20programmer%20manual.pdf