+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: CiC Read code 1B with USB (/showthread.php?tid=25092)
RE: CiC Read code 1B with USB - Sanyi85 - 01-08-2018
(01-08-2018, 08:24 AM)duncanduncan Wrote:(01-08-2018, 07:40 AM)Sanyi85 Wrote: I was generate this file.
But i think it is wrong!
Somebody help me!!!
Link:
1b.rar
Format looks good. Which map you want to make a code for?
Europe Premium 2018-2
VIN: WBAPX31090C252030
Generate: J6KTDI5BE2DWCABIAD7Q (Lifetime)
But not good. it is says insert the correct code....
Is there any problem, if we wrote a lot of wrong code?
RE: CiC Read code 1B with USB - duncanduncan - 01-08-2018
(01-08-2018, 08:38 AM)Sanyi85 Wrote:(01-08-2018, 08:24 AM)duncanduncan Wrote:(01-08-2018, 07:40 AM)Sanyi85 Wrote: I was generate this file.
But i think it is wrong!
Somebody help me!!!
Link:
1b.rar
Format looks good. Which map you want to make a code for?
Europe Premium 2018-2
VIN: WBAPX31090C252030
Generate: J6KTDI5BE2DWCABIAD7Q (Lifetime)
But not good. it is says insert the correct code....
Is there any problem, if we wrote a lot of wrong code?
No problem for entering wrong codes.
Your VIN was 1234567 in your 1b.hex file.
I changed it, try:
Q76JBVEXDM7TYABIAD7Q (lifetime)
RE: CiC Read code 1B with USB - duncanduncan - 01-08-2018
If it doesn't work, just use the script below:
1. format usb to fat32
2. copy the file copy_scr.sh to root of usb
3. startup navigation, wait about 30s, put usb in glovebox
4. after about another 30sec, pull usb out and hex file should be on usb.
5. Make code or email me this file.
RE: CiC Read code 1B with USB - Sanyi85 - 02-08-2018
ok!
Let's Try!
RE: CiC Read code 1B with USB - hashtagmaster - 05-10-2018
(01-08-2018, 14:31 PM)duncanduncan Wrote: If it doesn't work, just use the script below:
1. format usb to fat32
2. copy the file copy_scr.sh to root of usb
3. startup navigation, wait about 30s, put usb in glovebox
4. after about another 30sec, pull usb out and hex file should be on usb.
5. Make code or email me this file.
Not hex File on USB... I tested it 5 times ? Motion 2018_02 is now installed
RE: CiC Read code 1B with USB - Sedoy - 05-10-2018
This is only for Premium CIC, not Motion.
RE: CiC Read code 1B with USB - hashtagmaster - 05-10-2018
(05-10-2018, 12:43 PM)Sedoy Wrote: This is only for Premium CIC, not Motion.
how can I read myself the 1B at motion cic
RE: CiC Read code 1B with USB - Sedoy - 05-10-2018
Use SWID_Reader with installed/configured Ediabas and OBDII-Cable.
https://cartechnology.co.uk/showthread.php?tid=1969&pid=358537#pid358537
RE: CiC Read code 1B with USB - hashtagmaster - 06-10-2018
(05-10-2018, 13:38 PM)Sedoy Wrote: Use SWID_Reader with installed/configured Ediabas and OBDII-Cable.
https://cartechnology.co.uk/showthread.php?tid=1969&pid=358537#pid358537
I have already tested this tool with 3 different variants of it and always the same
RE: CiC Read code 1B with USB - Sedoy - 06-10-2018
Then try your luck, someone provides you an FSC repair kit, but please in the right thread that already exists. This contains the 1B file.