+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Please immo Off this FORD EEC-V - 104 pin (/showthread.php?tid=25181)
Please immo Off this FORD EEC-V - 104 pin - cleiwil - 17-06-2017
Hello Brothers
please immo off this ecu Ford Mondeo
EEC-V model: PAIN
104 pin out
Thanks!!!
RE: Please immo Off this FORD EEC-V - 104 pin - ayllon308 - 26-08-2017
Easy with focom or elm327 and forscan, to encode two new transponders
The codes with the calculator incode outcode
The cable is cheap and the procedure is super simple
RE: Please immo Off this FORD EEC-V - 104 pin - Dash_Burner - 27-08-2017
(17-06-2017, 13:17 PM)cleiwil Wrote: Hello Brothers
please immo off this ecu Ford Mondeo
EEC-V model: PAIN
104 pin out
Thanks!!!
desolder intel N7000 chip and bridge contact 4 with contact 13 there which the chip was. Sometimes it works sometimes not.