+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Free ASC Professional Remuver 5/2017 (/showthread.php?tid=25439)
RE: Free ASC Professional Remuver 5/2017 - DTech - 17-07-2017
(17-07-2017, 04:21 AM)bagelhs Wrote: Hi.
My Id
.---------------------------
Protection
---------------------------
tLkqRyVHAAjfuh+UjFCSNw==
---------------------------
ΟΚ
---------------------------
Thanks
RE: Free ASC Professional Remuver 5/2017 - odis - 17-07-2017
---------------------------
Protection
---------------------------
UPN8JtF5apDHUG+buNQ6BA==
---------------------------
thanks
RE: Free ASC Professional Remuver 5/2017 - volavka - 17-07-2017
(17-07-2017, 13:34 PM)odis Wrote: ---------------------------
Protection
---------------------------
UPN8JtF5apDHUG+buNQ6BA==
---------------------------
thanks
Done!
RE: Free ASC Professional Remuver 5/2017 - difituning - 18-07-2017
Please ,
---------------------
protection
---------------------
INsLCAUfgGgnEA+duNQ6BA==
thanks regards.
RE: Free ASC Professional Remuver 5/2017 - murto - 18-07-2017
---------------------------
Protection
---------------------------
VJUWHglTUSQLT/nQ6DgBZA==
---------------------------
OK
---------------------------
Can i get pass
RE: Free ASC Professional Remuver 5/2017 - DTech - 18-07-2017
(18-07-2017, 07:22 AM)murto Wrote: ---------------------------
Protection
---------------------------
VJUWHglTUSQLT/nQ6DgBZA==
---------------------------
OK
---------------------------
Can i get pass
RE: Free ASC Professional Remuver 5/2017 - difituning - 18-07-2017
Sorry the first key was wrong the correct one is lNsLCAUfgGgnEA+duNQ6BA ==
I changed the first letter that was not the uppercase but the lower case. Please apologize again and please help me with a new key. thank you
RE: Free ASC Professional Remuver 5/2017 - fantomel - 18-07-2017
(18-07-2017, 10:26 AM)difituning Wrote: Sorry the first key was wrong the correct one is lNsLCAUfgGgnEA+duNQ6BA ==I can tell you 100% this one is incorrect also. For sure there is no space after A and =.
I changed the first letter that was not the uppercase but the lower case. Please apologize again and please help me with a new key. thank you
Read 1st post. Run program, see hw id , push ctrl+c (no message) , make a new txt doc and there click right - paste (or ctrl+v), then you will have correct key.
RE: Free ASC Professional Remuver 5/2017 - difituning - 18-07-2017
Sorry I'm right but I copied letter by letter and I'm wrong. My mistake ... The same thank you anyway. My respects. Greetings
RE: Free ASC Professional Remuver 5/2017 - difituning - 18-07-2017
Thank you very much for helping. You were right here, now everything is co-ordinated. Thank you again, greetings.
---------------------------
Protection
---------------------------
lNsLCAUfgGgnEA+duNQ6BA==
---------------------------
OK
---------------------------