+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Icom NEXT and E series CIC (/showthread.php?tid=25450)
Pages:
1
2
Icom NEXT and E series CIC - evaldazj - 28-06-2017
Hi, anyone solved problem programming CIC in E series with NEXT through most is impossible? I have genuine NEXT with 3.15.00 firmware and old A1 clone icomB. With old A1 clone goes perfect, with NEXT programs first part in 1,5h, and then stops on 0%. In F series takes about 2.5h to flash cic, it is normal?
RE: Icom NEXT and E series CIC - MaxBmw - 28-06-2017
The original ICOM Next with 3.14.10 or 3.15.0 software works perfectly
Exx cic
RE: Icom NEXT and E series CIC - yippy - 28-06-2017
You mean, its a clone problem?
RE: Icom NEXT and E series CIC - masa52 - 28-06-2017
I think more related to software issue than hardware if only with cic problem
RE: Icom NEXT and E series CIC - evaldazj - 29-06-2017
(28-06-2017, 18:15 PM)MaxBmw Wrote: The original ICOM Next with 3.14.10 or 3.15.0 software works perfectly
Exx cic
No it won't, it's original with 3.15.0 allready, but with clone icom B adapter, maybe there is problem?
RE: Icom NEXT and E series CIC - MaxBmw - 29-06-2017
(29-06-2017, 05:22 AM)evaldazj Wrote:(28-06-2017, 18:15 PM)MaxBmw Wrote: The original ICOM Next with 3.14.10 or 3.15.0 software works perfectly
Exx cic
No it won't, it's original with 3.15.0 allready, but with clone icom B adapter, maybe there is problem?
Not to be confused - ICOM B clon works perfectly with the original ICOM Next
Exx CIC
RE: Icom NEXT and E series CIC - SweetBMW - 29-06-2017
BMW Claims the problem was with ICOM FW. All release notes from ISTA P says to be exptected fixed with FW 3.15.00.
RE: Icom NEXT and E series CIC - evaldazj - 29-06-2017
I was selected REMOTE:MOST_ASYNC_ab625 with easyconnect, maybe there problem is?
RE: Icom NEXT and E series CIC - evaldazj - 02-08-2017
Any sugestions? With my old A1 clone on same PC goes perfect.
RE: Icom NEXT and E series CIC - markmich - 05-08-2017
Hello,
ICOM Next works correctly only with ICOM Next B. Original ICOM B and Chinese ICOM B have a problem with CIC, checked on two ICOM NEXT.
Best Regards
MM