CarTechnoloGY
R270 programmer connection to 160D0WQ - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: R270 programmer connection to 160D0WQ (/showthread.php?tid=25789)

Pages: 1 2 3

R270 programmer connection to 160D0WQ - oem111 - 13-07-2017

Hi all, I just bought a set of R270+ Chip Programmer. Main purpose is to erase 35080/35160 chipset on used BMW instrument cluster so i can install it to my car. Can some kind soul advise me how to wire R270 to the chip?

Any help or advise will be greatly appreciated.

Thanks!handshake

RE: R270 programmer connection to 160D0WQ - rs@chip - 13-07-2017

(13-07-2017, 14:54 PM)oem111 Wrote:  Hi all, I just bought a set of R270+ Chip Programmer. Main purpose is to erase 35080/35160 chipset on used BMW instrument cluster so i can install it to my car. Can some kind soul advise me how to wire R270 to the chip?

Any help or advise will be greatly appreciated.

Thanks!handshake

you need to desolder chip and use adapter for best result.

R270 programmer connection to 160D0WQ - oem111 - 13-07-2017

Thanks for your reply. I did desolder and put to adapter but seems adapter is faulty as the[Image: 4f9120ca1352141747683e6cbf1fad41.jpg] LED has no light. And software v1.20 couldn't see the chip. So I am thinking to try the wire method

RE: R270 programmer connection to 160D0WQ - teerak2uk - 13-07-2017

Have you put 12v to it?

RE: R270 programmer connection to 160D0WQ - temsky740 - 13-07-2017

Turn eeprom another side

R270 programmer connection to 160D0WQ - oem111 - 13-07-2017

(13-07-2017, 16:57 PM)teerak2uk Wrote:  Have you put 12v to it?


Hi, how do I put 12V to R270? Now it's powered by the wall power supply.

Thanks


Sent from my iPhone using Tapatalk
(13-07-2017, 18:37 PM)temsky740 Wrote:  Turn eeprom another side


Hi, Yes I did tried doing this. The LED on adapter still don't light up and software don't see the chip as well.

Thanks


Sent from my iPhone using Tapatalk

RE: R270 programmer connection to 160D0WQ - rs@chip - 14-07-2017

(13-07-2017, 23:53 PM)oem111 Wrote:  
(13-07-2017, 16:57 PM)teerak2uk Wrote:  Have you put 12v to it?


Hi, how do I put 12V to R270? Now it's powered by the wall power supply.

Thanks


Sent from my iPhone using Tapatalk
(13-07-2017, 18:37 PM)temsky740 Wrote:  Turn eeprom another side


Hi, Yes I did tried doing this. The LED on adapter still don't light up and software don't see the chip as well.

Thanks


Sent from my iPhone using Tapatalk

look on this thread and compare your adapter with this one posted..you can try resolder all pins in case of bad soldering quality

http://cartechnology.co.uk/showthread.php?tid=15765&page=5&highlight=r270

R270 programmer connection to 160D0WQ - oem111 - 14-07-2017

(14-07-2017, 00:04 AM)alex.eobd2 Wrote:  
(13-07-2017, 23:53 PM)oem111 Wrote:  
(13-07-2017, 16:57 PM)teerak2uk Wrote:  Have you put 12v to it?


Hi, how do I put 12V to R270? Now it's powered by the wall power supply.

Thanks


Sent from my iPhone using Tapatalk
(13-07-2017, 18:37 PM)temsky740 Wrote:  Turn eeprom another side


Hi, Yes I did tried doing this. The LED on adapter still don't light up and software don't see the chip as well.

Thanks


Sent from my iPhone using Tapatalk

look on this thread and compare your adapter with this one posted..you can try resolder all pins in case of bad soldering quality

http://cartechnology.co.uk/showthread.php?tid=15765&page=5&highlight=r270


Ok thanks mate! Will do a detail read on the post. But am also not sure if the adapter I have now is a faulty unit as I didn't see any light from the LED at all.


Sent from my iPhone using Tapatalk

RE: R270 programmer connection to 160D0WQ - teerak2uk - 14-07-2017

Does box make a beep when powered?

In device manager can you see it?

R270 programmer connection to 160D0WQ - oem111 - 15-07-2017

(14-07-2017, 19:18 PM)teerak2uk Wrote:  Does box make a beep when powered?

In device manager can you see it?


Hi! Yes it beep when I put power to the unit. And yes Under device manager I am able to see this R270 hardware. This means it working?

Thanks in advance for any help!


Sent from my iPhone using Tapatalk
[Image: 6f4a7b09612daf2ce3adc1b93271c48d.jpg]

Window is able to see the R270 box without any problem.


Sent from my iPhone using Tapatalk