R270 programmer connection to 160D0WQ - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: R270 programmer connection to 160D0WQ (/showthread.php?tid=25789) |
R270 programmer connection to 160D0WQ - teerak2uk - 15-07-2017 Yes it is detected correctly check adaptor from this picture RE: R270 programmer connection to 160D0WQ - rs@chip - 15-07-2017 Make your adapter exactly like this one and you will be able to do all chips, iven v6 ones.. RE: R270 programmer connection to 160D0WQ - Levanime - 16-07-2017 (15-07-2017, 18:23 PM)alex.eobd2 Wrote: Make your adapter exactly like this one and you will be able to do all chips, iven v6 ones.. Alex, can u check this picture? do I read numbers correctly? RE: R270 programmer connection to 160D0WQ - autoraedarum - 16-07-2017 Which Windows do you use My r270 works on XP but on Win7 he does not work. Anyone have the vaild driver for Win7 ? RE: R270 programmer connection to 160D0WQ - eliaselias - 16-07-2017 It can work ok on win7 RE: R270 programmer connection to 160D0WQ - autoraedarum - 16-07-2017 Can you share driver for Win7 64bit, i tried also with driveres from this site http://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers but don`t got it work R270 programmer connection to 160D0WQ - oem111 - 16-07-2017 Hi, One important fact I need know is the LED will light up with connected to R270 with/without chip? Or only light when 5V is connected to the adapter? Sent from my iPhone using Tapatalk RE: R270 programmer connection to 160D0WQ - Levanime - 16-07-2017 (16-07-2017, 11:45 AM)eliaselias Wrote: It can work ok on win7 how? RE: R270 programmer connection to 160D0WQ - salkapone - 18-07-2017 Led on 35080 adapter only light when is comand read or write is send to him!!! but see this,when you start r270 softwrare you wil hear tre beep and in up corner you will see serial ,,,ofcorse if you input in instalation one of leters from serial!!!if you start without problem and you hear beeps than is problem in adapter!!!from expirince i know that plastic device is not trusted,,i have tre pic ,,,two metal and one plastic ,each work great!!! RE: R270 programmer connection to 160D0WQ - Avtoprofi - 18-07-2017 Try change from comport 10 to 1 or 2 And yes , it works on windows 7 32bit 100% |