DIGIPROG 3 user help thread ! - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: DIGIPROG 3 user help thread ! (/showthread.php?tid=261) |
RE: DIGIPROG 3 user help thread ! - siemens - 14-06-2015 VW Caddy 2012 OK RE: DIGIPROG 3 user help thread ! - valentino88 - 20-06-2015 Hello can you help me with the ford focus 1999-2001 how to make km chage becouse its giving me eror wje i make like the manual (readbook) thanls alott RE: DIGIPROG 3 user help thread ! - Dash_Burner - 20-06-2015 (20-06-2015, 15:51 PM)valentino88 Wrote: Hello can you help me with the ford focus 1999-2001 how to make km chage becouse its giving me eror wje i make like the manual (readbook) thanls alott dissasemble dash and find 24c16 eeprom. Try to do it by clip if impossible desolder chip. All these if you have digiprog or similar programmer RE: DIGIPROG 3 user help thread ! - scully - 20-06-2015 (11-06-2015, 11:31 AM)Dayo Wrote: Yes it seems that way. Iv only done the new model with xtool. Ill try xtool on he next 2009 i get in Hello day what version dp3 did u use and get insignia fault on? RE: DIGIPROG 3 user help thread ! - diagtech - 20-06-2015 Early focus is micro not eeprom RE: DIGIPROG 3 user help thread ! - Dayo - 21-06-2015 (20-06-2015, 23:00 PM)scully Wrote:(11-06-2015, 11:31 AM)Dayo Wrote: Yes it seems that way. Iv only done the new model with xtool. Ill try xtool on he next 2009 i get in 4.94 RE: DIGIPROG 3 user help thread ! - mrmx - 30-06-2015 Hi all, having issues with the digiprog 3 on a 2010 mk4 ford mondeo tdci diesel (cd345 ba7). we have it in my work for a cluster/ecu repair but the used cluster we installed is 10780km over what the original so need to do an odometer correction as customer is not happy with this situation. we cant get digiprog to correct? cluster p/n is VISTEON AM2T-10849-CC if that is any help? Thanks in advance for any help what so ever. RE: DIGIPROG 3 user help thread ! - Clusters - 30-06-2015 (30-06-2015, 03:59 AM)mrmx Wrote: Hi all,I have two in Digi manuals for that, which one did you use? Also attached the enigma file too just in case. Colors Enigma Digiwigi BDM Green Yellow Ground Black Brown Reset Blue Green Positive Purple White RE: DIGIPROG 3 user help thread ! - mrmx - 30-06-2015 Ok thanks for that. mine was in german so i tried each type but that was plugged into the obd port, ( hope that didnt do any damage). is there no way to do it without the soldering? (another device even) as i noticed that the lcd display on this one is half the size of the ones in your uploads, dont want to risk chip corruption or malfunction if i haven't already that is? PS.. ive taken the back off the cluster & your first upload is not like this cluster at all, the second is closer but not the same, & the enigma is the closest but still not the same...crazy. any ideas? anyone? thanks again RE: DIGIPROG 3 user help thread ! - Dayo - 30-06-2015 Post a pic of the dash mate. Iv done a 64 plate via obd with digi, but it was the last of the old shape. |