DIGIPROG 3 user help thread ! - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: DIGIPROG 3 user help thread ! (/showthread.php?tid=261) |
RE: DIGIPROG 3 user help thread ! - Amir2020 - 23-12-2013 Golf 5 2009 MM9 km not change can't do by OBD Digiprog 3 V4.85 RE: DIGIPROG 3 user help thread ! - bochen - 24-12-2013 Q7 -obd ok Golf Plus obd ok Golf 5 Dash and ECU obd ok Ducato 2008 dash obd ok Touran dash and ECU obd ok Mondeo MK3 hc12 via dash pionts ok Golf 3 via dash connector not ok Mondeo MK4 dash with big color lcd version unknown Vectra B dash obd ok RE: DIGIPROG 3 user help thread ! - Amir2020 - 24-12-2013 (24-12-2013, 09:54 AM)bochen Wrote: Q7 -obd ok My friend you have already tried to Golf 5 Dash mm9 Model 2009 obd ok RE: DIGIPROG 3 user help thread ! - bochen - 24-12-2013 (24-12-2013, 11:48 AM)Amir2020 Wrote: My friend I did not check if it was MM9 just chose Golf 5 and go on. I did 2 Golf 5 with no problem. I also did Amarok 2012 year obd ok. RE: DIGIPROG 3 user help thread ! - Avtoprofi - 24-12-2013 Hy i have try a polo MM and trough obd was no suches look the manual RE: DIGIPROG 3 user help thread ! - bochen - 28-12-2013 Mercedes w251 R klasse 2009 year dash via obd ok not need to do EZS. RE: DIGIPROG 3 user help thread ! - maximus1980 - 14-01-2014 Hi there Just used v4.82 on seat ibiza 2012 6J, 1.6TDI CR read & write ok Regards RE: DIGIPROG 3 user help thread ! - doslamer - 14-01-2014 Mercedes w203 EZS with hc908 - work ok(tested by me) with connector 42 just follow instructions in pdf. RE: DIGIPROG 3 user help thread ! - P206gti - 14-01-2014 Volvo xc90 dash ok Yamaha r1 2002 ok I have question. BMW 2006 335 E90 the milage is also stored in the key ? How does this work? Does the Key change milage When the tacho and cas unit is set with new milage? Please help me and please explain for me how to do. RE: DIGIPROG 3 user help thread ! - Amir2020 - 15-01-2014 (24-12-2013, 13:53 PM)Avtoprofi Wrote: Hy Do you have a manual |