+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: DIGIPROG 3 user help thread ! (/showthread.php?tid=261)
RE: DIGIPROG 3 user help thread ! - eliaskok - 31-10-2017
Hi why the colours of plug 48 different from the plug that shows in the pdf manual?
RE: DIGIPROG 3 user help thread ! - Clusters - 31-10-2017
(31-10-2017, 18:25 PM)eliaskok Wrote: Hi why the colours of plug 48 different from the plug that shows in the pdf manual?Because the clone cables are all the wrong colors.
RE: DIGIPROG 3 user help thread ! - ltujustas - 13-12-2017
Hi. I tried correct mileage of audi a8 2008-2009 it's says need access code, where I can find that code ? cluster 4e0910901g
RE: DIGIPROG 3 user help thread ! - darek_naprawa - 13-12-2017
Here you can find.
RE: DIGIPROG 3 user help thread ! - pietje001 - 13-12-2017
(13-12-2017, 15:50 PM)darek_naprawa Wrote: Here you can find.
did you even check the file yourself?? (your file is for 2010- model)
this is the correct manual to solve his problem!
RE: DIGIPROG 3 user help thread ! - Shadows93 - 14-12-2017
Hello everyone,
i try to change the mileage value of my opel meriva without success while the tool is set to do it by obd.
I can not even read the mileage of the vehicle.
Any ideas?
RE: DIGIPROG 3 user help thread ! - pietje001 - 14-12-2017
(14-12-2017, 19:35 PM)Shadows93 Wrote: Hello everyone,
i try to change the mileage value of my opel meriva without success while the tool is set to do it by obd.
I can not even read the mileage of the vehicle.
Any ideas?
First model meriva?
You need to hold the trip meter button while programming
RE: DIGIPROG 3 user help thread ! - Shadows93 - 14-12-2017
(14-12-2017, 19:38 PM)pietje001 Wrote:(14-12-2017, 19:35 PM)Shadows93 Wrote: Hello everyone,
i try to change the mileage value of my opel meriva without success while the tool is set to do it by obd.
I can not even read the mileage of the vehicle.
Any ideas?
First model meriva?
You need to hold the trip meter button while programming
Meriva A of 05/2006 it is the second phase
I do not know why it does not work
I don't try to hold the trip meter button
but already I can not see the old milage it is normaly ?
Thanks
RE: DIGIPROG 3 user help thread ! - pietje001 - 14-12-2017
2006 should work fine!
I'm not sure about old mileage. This happens for some cars, then it shows '?'.. as long it doesn't read a non existing mileage you're good to try.
Normally it works. So just hold trip meter button before your enter new mileage. And release when you're done.
It might be needed to disconnect battery 1min
RE: DIGIPROG 3 user help thread ! - ltujustas - 14-12-2017
(13-12-2017, 21:14 PM)pietje001 Wrote:(13-12-2017, 15:50 PM)darek_naprawa Wrote: Here you can find.
did you even check the file yourself?? (your file is for 2010- model)
this is the correct manual to solve his problem!
I forgot about this, thanks.
