CarTechnoloGY
DIGIPROG 3 user help thread ! - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: DIGIPROG 3 user help thread ! (/showthread.php?tid=261)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

RE: DIGIPROG 3 user help thread ! - Shadows93 - 14-12-2017

(14-12-2017, 20:08 PM)pietje001 Wrote:  2006 should work fine!
I'm not sure about old mileage. This happens for some cars, then it shows '?'.. as long it doesn't read a non existing mileage you're good to try.
Normally it works. So just hold trip meter button before your enter new mileage. And release when you're done.
It might be needed to disconnect battery 1min

ok thanks for the information i will try her and i would make a return

RE: DIGIPROG 3 user help thread ! - Shadows93 - 15-12-2017

(14-12-2017, 20:13 PM)Shadows93 Wrote:  
(14-12-2017, 20:08 PM)pietje001 Wrote:  2006 should work fine!
I'm not sure about old mileage. This happens for some cars, then it shows '?'.. as long it doesn't read a non existing mileage you're good to try.
Normally it works. So just hold trip meter button before your enter new mileage. And release when you're done.
It might be needed to disconnect battery 1min

ok thanks for the information i will try her and i would make a return

I try today with the engine started and when I started writing I hold trip meter button.
After I removed the battery a can be 1min and it was good.
thanks for the help

RE: DIGIPROG 3 user help thread ! - Shadows93 - 17-12-2017

Hi everybody,
Does anyone know the difference between digiprog 4.94 and digiprog 4.94 by yanhua?
Do you do more things and if so which ones?

Thanks

RE: DIGIPROG 3 user help thread ! - darek_naprawa - 17-12-2017

There is no difference, he does the same.
Maybe it's a bit better quality.

RE: DIGIPROG 3 user help thread ! - pietje001 - 17-12-2017

Yanhua is other factory. Better quality. But i d0nt think they made an 4.94 (only 4.88). I think it's scam.
Latest normal digiprog is next generation, is not bad tool

RE: DIGIPROG 3 user help thread ! - Shadows93 - 17-12-2017

(17-12-2017, 11:15 AM)pietje001 Wrote:  Yanhua is other factory. Better quality. But i d0nt think they made an 4.94 (only 4.88). I think it's scam.
Latest normal digiprog is next generation, is not bad tool

Yes, according to which I saw the last version digiprog by yanhua is 4.88 and an update is possible to pass in 4.94.
So the latest digiprog 4.94 basic do what it promises?
I have doubts about the list of vehicles provided by the Chinese.
What do you think ?

RE: DIGIPROG 3 user help thread ! - pietje001 - 17-12-2017

Allmost everything works fine. dont worry

RE: DIGIPROG 3 user help thread ! - marmaro - 18-12-2017

HI.
Can someone try update yanhua 4.88 to 4.94?

RE: DIGIPROG 3 user help thread ! - dankocg - 10-01-2018

Can they with this tool succeed in returning miles to the BMW F30 2012. Km are located in the M35160 in Dash and Fem or do i have to go somewhere else? Thanks smile

RE: DIGIPROG 3 user help thread ! - pietje001 - 10-01-2018

(10-01-2018, 16:21 PM)dankocg Wrote:  Can they with this tool succeed in returning miles to the BMW F30 2012. Km are located in the M35160 in Dash and Fem or do i have to go somewhere else? Thanks smile

Change dash + put canfilter in fem or dash