+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: HELP ERROR ISTA-P - Battery Voltage (/showthread.php?tid=26289)
HELP ERROR ISTA-P - Battery Voltage - diogomelop - 29-07-2017
Hello friends of the forum.
Hello friends of the forum. I have a problem with my BMW M5, 2006, I can not run or program via ista-p, it happens that a message appears in the reading and identification of the carror. Needing this error accuses the battery voltage is low, below 30 bourn, however, the battery is in perfect condition. Before this message the program asks if the ignition is on, with the option to continue informing that the ignition is not on or is on and does not work (in my case it is on). Anyway, can someone help me solve the problem?
Obs. I am using a power stabilizer, automotive source of 14.4 v. Battery (pictures attached to the screen of the ista-p).
Obs.2. I am using the K-DCAN, I could not install the ICOM cable, my ITOOL Radar appears completely blank, I will open topic on this subject not to shuffle.
I thank you for your help and apologize for ignorance
RE: HELP ERROR ISTA-P - Battery Voltage - SweetBMW - 29-07-2017
IT is because you are using Usb cable. This does not detect the voltage. DO NOT PROGRAM YOUR CAR WOTH THIS CABLE! YOU WILL BREAK IT!!
RE: HELP ERROR ISTA-P - Battery Voltage - diogomelop - 29-07-2017
Should I use the enet cable?
I can not install it through Itool radar, because it does not detect it.
RE: HELP ERROR ISTA-P - Battery Voltage - SweetBMW - 29-07-2017
Enet is for f series. Won't work. You need to fix your icom.