E-SYS ICOM Connection Problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E-SYS ICOM Connection Problem (/showthread.php?tid=26748) |
E-SYS ICOM Connection Problem - bmw335coding - 12-08-2017 Hi guys, after update to firmware of my ICOM A1 to newest 03-15-00 i have an connection problem with esys to all cars (try f30, f10, f25...). This is the error message: "Connection check failed. Gateway/ECUs are not correctly connected or not responding. However Functions using the ODX-Data can be used. [G188]" I locked the ICOM like the times before update and put the IP in ESYS. Before update all was ok. Connection to ISTA and EDIBAS with ICOM is successfull. Anyone has an idea? E-SYS ICOM Connection Problem - mjuhl2003 - 12-08-2017 You should NOT lock icom. When using e-sys. As I recall it Sent from my iPhone using Tapatalk RE: E-SYS ICOM Connection Problem - shawnsheridan - 12-08-2017 (12-08-2017, 12:49 PM)mjuhl2003 Wrote: You should NOT lock icom. When using e-sys. As I recall it No, ICOM must be locked for E-Sys use. E-SYS ICOM Connection Problem - mjuhl2003 - 12-08-2017 Shawn is right[THUMBS UP SIGN] Sent from my iPhone using Tapatalk E-SYS ICOM Connection Problem - bmw335coding - 12-08-2017 (12-08-2017, 12:49 PM)mjuhl2003 Wrote: You should NOT lock icom. When using e-sys. As I recall it 100% ICOM must be locked to use with ESYS since years! RE: E-SYS ICOM Connection Problem - jaramillo - 12-08-2017 (12-08-2017, 13:20 PM)shawnsheridan Wrote:(12-08-2017, 12:49 PM)mjuhl2003 Wrote: You should NOT lock icom. When using e-sys. As I recall it Hi Shawn, Im just curious about this, I have been working with E-SYS all time, without locking the ICOM. Locking it, is a security measure? or what is the porpouse of doing it? Thanks´in advance! RE: E-SYS ICOM Connection Problem - shawnsheridan - 12-08-2017 (12-08-2017, 22:44 PM)jaramillo Wrote: Hi Shawn, You don't hit "Reserve" if using iTool Radar or check the "ICOM Lock" checkbox if using EasyConnect Utility? RE: E-SYS ICOM Connection Problem - jaramillo - 12-08-2017 (12-08-2017, 22:51 PM)shawnsheridan Wrote:(12-08-2017, 22:44 PM)jaramillo Wrote: Hi Shawn, I've never used Itool radar or EasyConnect with Esys, in order to lock the ICOM, just conect it and works with out any problem. Just with NCSEXPER I lock the ICOM (Reserve) |