+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Mahindra E8 EDC16C39 (/showthread.php?tid=26883)
Mahindra E8 EDC16C39 - community towing - 16-08-2017
Hi all busy on a Mahindra 2.2 diesel have fault code P1093 (fuel pressure sensor High input ) when sensor is plugged out same fault code shows pops up tested signal wire and it has five volts on it with out connecting the fuel pressure sensor the sensor has three wires (1) five volt (2) earth (3) signal input if any one had issue like this please help ECU is a Bosch EDC16C39
RE: Mahindra E8 EDC16C39 - dubakoor - 19-08-2017
Replace your common rail with FPS and check again.