MB sprinter mileage correction (with tachograph) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: MB sprinter mileage correction (with tachograph) (/showthread.php?tid=26980) |
MB sprinter mileage correction (with tachograph) - Dash_Burner - 20-08-2017 Hi all. I have here an MB sprinter 2009 model with VDO tachograph (the one with two slot cards). I adjust milleage with sucess in dash and ezs but when i turn ignition on dash shows only ---------. Same happens if i disconect tachograph from car. I also used a dump in instrument from a sprinter without tacho without sucess. I removed the small baterry from tachograph and now is dead. Is there any way to remove tachograph from this car using MB Star and correct milleage ? Here are ori dumps from dash and ezs. RE: MB sprinter mileage correction (with tachograph) - viytik - 20-08-2017 You dash no tacho RE: MB sprinter mileage correction (with tachograph) - Dash_Burner - 20-08-2017 (20-08-2017, 12:28 PM)viytik Wrote: You dash no tacho Thanks mate. I will test and report tomorrow But is it so simple ? Write file to dash reset ezs and all will be ok ? I see in wiring diagram that can line passes from tachograph and i think that tacho controls instruments. Anyway i will try and report. Until then i will appreciate any other help. RE: MB sprinter mileage correction (with tachograph) - Cristiony - 23-08-2017 Hello, I have to write only the memory of the tachograph and you get on board all the miles that write it in the tachograph |