+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: EDC15 P Passat 1.9 TDI PD AVB Problem (/showthread.php?tid=27147)
Pages:
1
2
EDC15 P Passat 1.9 TDI PD AVB Problem - blouzi - 24-08-2017
Hi Experts,
Please I need help...
After dowloading flash using (Galetto EOBD1260) and EGR off using (ADS EGR Remover 2017.05) and write modified file with EOBD1260.
Now the car won't start ESP/ABS light on, I cant read/write ECU!
I've tried also with FGTECH /MPPS13 can't read or write!
BOSCH EDC15 P
Num. HW: 0281010667
Num. SW: 1037362051
Attached Orginal / Modified file
Thanks
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - koyot - 24-08-2017
Program flash with beeprog
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - blouzi - 24-08-2017
(24-08-2017, 21:38 PM)koyot Wrote: Program flash with beeprog
Sorry but I don't understand how I can fix this issue..
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - ltujustas - 24-08-2017
You have lost something in ecu... you need take out ecu, desolder flash and write original dump, if that will not work try desolder eeprom flash and write new, don't forget change vin number in eeprom and program keys, or just turn off immo. Or if you dont have any tool to read/write desolder flashes, than just buy new ecu and turn down immo.
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - volavka - 24-08-2017
Guess it's just communication lost, and galletto can't identificate ecu id
as Mr.koyot & ltujustas said ... write back original flash by beeprog then should be fine
no worries about checksum cuz is beeprog writing calc/write checksum
Good luck
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - eurofix - 25-08-2017
Desoldering flash and use programator.
Program flash with beeprog OR TL 866 [/align]
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - blouzi - 25-08-2017
(25-08-2017, 07:10 AM)eurofix Wrote: Desoldering flash and use programator.
Program flash with beeprog OR TL 866 [/align]
Hi,
I don't have BeepProg or TL 866, I do have Xprog, FGTECH, Wellon VP 390, CarProg, BDM100.
Please send me Pinout for programator I already have.
Thanks
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - ltujustas - 25-08-2017
You don't need pinout. Just desolder 29f400 flash and write ori dump.
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - gabivw - 25-08-2017
Hi.
You can recovery without... Desoldering.
You need Mpps 13..16..18..
And select vw... 1,9...edc15p
Select original file... And write
Select only write. Without Ecu id... Or read
I have tested this solution on 3..4 Ecu edc15p
And work 100%
Please report
RE: EDC15 P Passat 1.9 TDI PD AVB Problem - blouzi - 27-08-2017
(25-08-2017, 14:56 PM)gabivw Wrote: Hi.
You can recovery without... Desoldering.
You need Mpps 13..16..18..
And select vw... 1,9...edc15p
Select original file... And write
Select only write. Without Ecu id... Or read
I have tested this solution on 3..4 Ecu edc15p
And work 100%
Please report
Try it many times no chance
(25-08-2017, 14:43 PM)ltujustas Wrote: You don't need pinout. Just desolder 29f400 flash and write ori dump.
Desoldered, i can't write org/mod dump, i will buy a new eeprom and try.