Kess v2 um00:3710??? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Kess v2 um00:3710??? (/showthread.php?tid=27185) Pages:
1
2
|
Kess v2 um00:3710??? - Mex165 - 26-08-2017 Was trying to read/id my DQ250 and only got to ignition on, ignition off and then um00:3710...! The DQ250 adapter is original, everything else is not (4.036)... Does anybody know what is causing this problem? My Kess v2 is not working with k-line either, so I guess I need to change something else on the board? RE: Kess v2 um00:3710??? - Remap Ross - 26-08-2017 The um00 code is from ksuite and means kess found an error that alien tech haven't written a description of Tell more about tool RE: Kess v2 um00:3710??? - Mex165 - 26-08-2017 The one I suspect is L9613 (but I have 2 SI9243 that im thinking of "putting" in (well one of them))... I have it at work but i´ll post Fantomels that I worked from (and all this is done, but only works well on CAN)... RE: Kess v2 um00:3710??? - Remap Ross - 26-08-2017 Well yes a rework would have been the first thing to do RE: Kess v2 um00:3710??? - Mex165 - 26-08-2017 Yes, but what to do now? RE: Kess v2 um00:3710??? - Remap Ross - 26-08-2017 Rework with hi quality parts then try again RE: Kess v2 um00:3710??? - Mex165 - 26-08-2017 The parts are from Germany and of high quality, that's the problem... If nobody says SI9243 will do harm in my Kess V2, I´ll just put it in... (New Kess V2 & K-tag arrives on tuesday, so just 4 fun) RE: Kess v2 um00:3710??? - 8baller - 27-08-2017 What OS are you running? what version of ksuite? what firmware on the kess? RE: Kess v2 um00:3710??? - Mex165 - 27-08-2017 Win7 32bit 2.08 4.036 RE: Kess v2 um00:3710??? - Mex165 - 29-08-2017 Got a new one with a better start (if to change something and not EVERYTHING!!!). I will try this 5.017 tomorrow and report back... |