Central Conv. (J393) 8K0 907 064 CQ firmware update - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: Central Conv. (J393) 8K0 907 064 CQ firmware update (/showthread.php?tid=27227) |
Central Conv. (J393) 8K0 907 064 CQ firmware update - apoelistas - 27-08-2017 My comfort module is 8K0 907 064 CQ with firmware 0437. (Q5 2009 CDNC) What is the latest firmware I can update it to?? I have noticed that there are 2 types of firmwares e.g. 8K0907064___0530_S.sgo 8K0907064___0530_E.sgo or 8K0907064___0633_S.sgo 8K0907064___0633_E.sgo Does anyone know what is S and what is E?? Is it related to the hybrid version??? In ETKA part 8K0907064CQ it says see parts bulletin 9-101. Not sure if something additional can be found there. RE: Central Conv. (J393) 8K0 907 064 CQ firmware update - apoelistas - 28-08-2017 Is it E for E-tron (hybrid) S for standard?? Anyone?? (It makes sense to use the S if I would pick one using common sense) RE: Central Conv. (J393) 8K0 907 064 CQ firmware update - robot1 - 28-08-2017 Are you sure if this File is compatible for you ecu? You try to flash a ecu were a Engine Protection is Inside also,so if the flash fail you Cant Start the car. What is the Reason to flash this ecu? RE: Central Conv. (J393) 8K0 907 064 CQ firmware update - apoelistas - 28-08-2017 A friend with the same Comfort unit (8K0907064CQ), who has also retrofitted keyless, bought also a new comfort unit but came with firmware 0530. Flashing of comfort unit has to be done with blinkers (hazard lights) on. Not sure what improvements are made. I cannot flash with SVM. I will loose keyless entry function (I also do not think that I can find an SVM in ERWIN due to my vehicle being 2009). ERWIN might get updated with my new hardware but I am not sure. So I wanted to know mostly what E and S means, and maybe latest applicable firmware. Something going astray is a major factor to think about, when I have all the information and hardware I need I will consider this. I am more afraid of flashing gateway offline, which will cause more problems than comfort unit. RE: Central Conv. (J393) 8K0 907 064 CQ firmware update - apoelistas - 12-09-2017 Due to limited information on this subject, I will stay with firmware 0437. When I asked at a german forum what is the latest for prefacelift the reply was 0437. I do not have ETKA parts bulletin access or any TPI to confirm any higher firmware number update. RE: Central Conv. (J393) 8K0 907 064 CQ firmware update - durchblicker - 15-10-2018 I also want to know about the difference between E an S . Does anybody know that? I want to flash 8K0907064GF 0633 up to KF 0711. Which file I have to use? 8K0907064__0711_E.sgo or 8K0907064__0711_S.sgo thanks RE: Central Conv. (J393) 8K0 907 064 CQ firmware update - apoelistas - 15-10-2018 prefacelift or facelift? In either case (unless hybrid) use S. Note prefacelift is up to firmware 0437 RE: Central Conv. (J393) 8K0 907 064 CQ firmware update - durchblicker - 21-10-2018 thanks. Its a facelift. |