What is the better tool for read ECU trucks? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Car Technology Trucks / Heavy Vehicles Forum (https://cartechnology.co.uk/forumdisplay.php?fid=22) +--- Forum: Trucks / Heavy Vehicles Hardware & Tools (https://cartechnology.co.uk/forumdisplay.php?fid=33) +--- Thread: What is the better tool for read ECU trucks? (/showthread.php?tid=27795) |
What is the better tool for read ECU trucks? - spauds - 15-09-2017 Hello, i interest in read a ecu of trucks, but i dont know what is the better machine. thanks RE: What is the better tool for read ECU trucks? - elhaddad111 - 07-10-2017 You can buy Nexiq or DPA5 clone RE: What is the better tool for read ECU trucks? - alleshateinende - 07-10-2017 WABCO of course.... RE: What is the better tool for read ECU trucks? - jnoroeste - 13-11-2017 Hi M8, for reading and writting kess v2 from Alientech is so far the best tool in the market. Regards. RE: What is the better tool for read ECU trucks? - Giuseppe Mark - 15-11-2017 Even the newest kess v5.017 can support trucks models as well But KESS v5.017 works better for more 12V gasoline cars, K TAG V7.020 works better for more 12V Diesel Cars and 24V trucks/tractors/motorcycles. And KESS V5.017 can not work well For Toyota Denso 76F00XX ECU Protocol,But KTAG V7.020 can work For Toyota Denso 76F00XX very well ! If you need best ecu programmer for trucks, ktag v7.020 will be better RE: What is the better tool for read ECU trucks? - obdtool - 17-11-2017 (15-11-2017, 09:51 AM)Giuseppe Mark Wrote: Even the newest kess v5.017 can support trucks models as well You mean clone ktag v7.020? |