+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Clio 3 immo off Siemens sim32 with can (/showthread.php?tid=27838)
Clio 3 immo off Siemens sim32 with can - Lenard6144 - 16-09-2017
Hi I'm trying too immo off a sim32 how ever no immo solution I can find dose the job on the 95160 in fact iud 3 Volta and others just seem too blank part of the eeprom including where the vin is any body have any ideas on this ?
RE: Clio 3 immo off Siemens sim32 with can - CHIKODIAG - 16-09-2017
HI
there is no immo off for your ecu only virgin and recode dont waste your time
GOOD LUCK
RE: Clio 3 immo off Siemens sim32 with can - dell66 - 16-09-2017
Https://www.youtube.com/watch?v=hZKoiPv5RDQ
RE: Clio 3 immo off Siemens sim32 with can - obdtool-service - 17-09-2017
Carlabimmo bring last week new update for julie emulator for sim32
RE: Clio 3 immo off Siemens sim32 with can - westamine - 17-09-2017
Clio 3 ?? if for clio 3 i have a solution
sorry no solution for clio 3 i have a solution for clio 2 sim 32 102a
RE: Clio 3 immo off Siemens sim32 with can - Lenard6144 - 18-09-2017
(16-09-2017, 19:10 PM)CHIKODIAG Wrote: HI
there is no immo off for your ecu only virgin and recode dont waste your time
GOOD LUCK
thanks for the clear answer any ideas on what to change in memory to virginise thanks
and guys thank you but emulators are just that not a full off solution
RE: Clio 3 immo off Siemens sim32 with can - ROD-BENDERS - 18-09-2017
(18-09-2017, 09:40 AM)Lenard6144 Wrote:(16-09-2017, 19:10 PM)CHIKODIAG Wrote: HI
there is no immo off for your ecu only virgin and recode dont waste your time
GOOD LUCK
thanks for the clear answer any ideas on what to change in memory to virginise thanks
and guys thank you but emulators are just that not a full off solution
I would say yes emulators offer a full immo off solution
you wont need a key transponder to start the car
RE: Clio 3 immo off Siemens sim32 with can - dadal - 24-01-2018
Some version has immo in eprom, but some version has immo in MCU..
how to adapt ecu after virgin ( immo in MCU version ) ? it is auto learn after first ignition or need reprogram with renault can clip?