+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Peugeot 307, After virgin on BSI, why the key can't program (/showthread.php?tid=28017)
Peugeot 307, After virgin on BSI, why the key can't program - ecupro - 22-09-2017
Dear all members,
After virgin the BSI, key in the vin number, configure the parameters.
When program the key (after key in the four code), BSI prompt me how many key have to program.
So, I key in for one key only and prompt me to insert the key, and also switch on the ignition, the BSI suppose program the key chip, but it prompt this message :
" Check key program on key 1"
So, my question is, why the key chip can not be program ?
( I can confirm the vin number and four code are right )
Can any members help me out ?
Thanks in advance.
Regards.
RE: Peugeot 307, After virgin on BSI, why the key can't program - marianro2007 - 22-09-2017
Hi! Did you set de carpass/PIN in BSI? Check wire from COM to BSI and key antenna.
RE: Peugeot 307, After virgin on BSI, why the key can't program - say882 - 06-10-2017
Verify if your transponder good,your transponder is used or virgin one;because some time quality of chip have this effect