+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Audi q7 immo (/showthread.php?tid=28340)
Audi q7 immo - widlak - 01-10-2017
Hi all
I have a edc16cp34 from a audi q7 ,3.0 engine i need immo PIN please ,to test new ecu please ,thank you.
RE: Audi q7 immo - M83 - 01-10-2017
Reading of eeprom. regards
RE: Audi q7 immo - widlak - 01-10-2017
Hi
old ecu is corrupted, i have only mod files. ecu has been bruised and absolutely does not communicate
RE: Audi q7 immo - volavka - 01-10-2017
Code Pin inside eeprom area not flash
RE: Audi q7 immo - M83 - 01-10-2017
(01-10-2017, 13:03 PM)widlak Wrote: Hi
old ecu is corrupted, i have only mod files. ecu has been bruised and absolutely does not communicate
Dismount ecu and read eeprom 95320 or 95640
RE: Audi q7 immo - widlak - 01-10-2017
Is it possible to switch the eprom from the old ecu to the new ecu? did it work?
well thank you
i dont have a reader on eprom
RE: Audi q7 immo - perso69 - 01-10-2017
(01-10-2017, 21:58 PM)widlak Wrote: Is it possible to switch the eprom from the old ecu to the new ecu? did it work?
well thank you
i dont have a reader on eprom
You ask for help and members trying to help you, why don't listen the answer you've got???
If you want to do the way you want, just do it!!!
RE: Audi q7 immo - volavka - 01-10-2017
(01-10-2017, 21:58 PM)widlak Wrote: Is it possible to switch the eprom from the old ecu to the new ecu? did it work?
i dont have a reader on eprom
well thank you
Yes .. use hot air or Iron Welding Pen to remove eeprom from old ecu then solder it in new ecu
Good luck
