GTS DCT flash on a F80 M3? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: GTS DCT flash on a F80 M3? (/showthread.php?tid=28698) |
GTS DCT flash on a F80 M3? - Mrg0721 - 11-10-2017 Does anyone know how to flash GTS DCT software in a F80 M3? Thanks RE: GTS DCT flash on a F80 M3? - Almaretto - 11-10-2017 Change Chassis and Typecode in FA, run tal-calculation, flash EGS. RE: GTS DCT flash on a F80 M3? - dazuc - 12-10-2017 Edit the FA, change the Typschlüssel to 4S93 (or 4S91 if euro model). Then (11-10-2017, 05:24 AM)Almaretto Wrote: run tal-calculation, flash EGS. RE: GTS DCT flash on a F80 M3? - PeterY - 19-11-2018 (12-10-2017, 05:22 AM)dazuc Wrote: Edit the FA, change the Typschlüssel to 4S93 (or 4S91 if euro model). Do we only check the boxes for "swDeploy" and "cdDeploy" for the EGS? No need to flash the bootloader or anything else? Also, should I use an ICOM cable or just stick to an ENET, I got both. Thanks, Peter RE: GTS DCT flash on a F80 M3? - tokarszczak - 19-11-2018 Flash also rear differ, egs and eps. F80 will be different car RE: GTS DCT flash on a F80 M3? - Almaretto - 20-11-2018 (19-11-2018, 15:52 PM)PeterY Wrote: Do we only check the boxes for "swDeploy" and "cdDeploy" for the EGS? No need to flash the bootloader or anything else? blFlash: Flashes new Bootloader (BTLD) swDeploy: Flashes new Software (SWFL) cdDeploy: Encodes (e.g. VO Codes ECU, CAFD) ibaDeploy: used to update the Owners manual for HU (IBAD). EGS only needs swfl & btld; there is no CAFD. ENET is fine. |