Help Toyota immo - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Help Toyota immo (/showthread.php?tid=29169) |
Help Toyota immo - Kenny - 23-10-2017 Hi I have 2010 Toyota 1.3 It has 89661-02s70 Denso ECU. The computer box shorted so i have 2nd hand ecu to put in. Witch chip do i read and flash? Is it possible for immo off? If someone can please guide me to solution. Thanks RE: Help Toyota immo - cjawahir - 24-10-2017 No need do any thing except sync , bridge pin 13 to pin 5 of diagnostic connector and switch ignition on for 30min . then switch off remove jumper and start . cj RE: Help Toyota immo - Kenny - 24-10-2017 Thanks I will give it a try Sent from my D6603 using Tapatalk RE: Help Toyota immo - raffy haddad - 24-10-2017 Hello is it pin 5 or pin 4 with pin 13 ? Regards RE: Help Toyota immo - ucokseparoh - 17-11-2017 (24-10-2017, 05:59 AM)raffy haddad Wrote: Hello is it pin 5 or pin 4 with pin 13 ? it's pin 4 + 13 or tc gc. RE: Help Toyota immo - Dash_Burner - 17-11-2017 (24-10-2017, 05:59 AM)raffy haddad Wrote: Hello is it pin 5 or pin 4 with pin 13 ? Pin 4 and pin 5 in obd is the same. GND RE: Help Toyota immo - raffy haddad - 17-11-2017 (17-11-2017, 19:59 PM)Dash_Burner Wrote:(24-10-2017, 05:59 AM)raffy haddad Wrote: Hello is it pin 5 or pin 4 with pin 13 ? Hello Thanks i always forget that obd socket 4&5 are grounds Thanks again |