Mazda 6 2008 BCM problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: Mazda 6 2008 BCM problem (/showthread.php?tid=29170) |
Mazda 6 2008 BCM problem - Mex165 - 23-10-2017 I have a Mazda 6 2008 that has a problem with BCM. I took it apart and soldered a broken bridge (burnt) and now Everything works exept locking the doors. It unlocks the doors without problem, but if I press buttons on remote to many times the 30A fuse blows... BCM = VP7ALF-14B205-GJ Cannot find a replacement (used) with GJ! What will fit and function with the car? RE: Mazda 6 2008 BCM problem - Mex165 - 01-12-2017 Nobody knows? (23-10-2017, 20:39 PM)Mex165 Wrote: I have a Mazda 6 2008 that has a problem with BCM. RE: Mazda 6 2008 BCM problem - xtac1080 - 07-12-2017 (23-10-2017, 20:39 PM)Mex165 Wrote: I have a Mazda 6 2008 that has a problem with BCM. There are lots of 30A fuses in this car. Which one is blowing? What caused the initial BCM short? RE: Mazda 6 2008 BCM problem - Mex165 - 08-12-2017 There is only one for locks and trunk. That fuse is on the top middle (a while ago) by the bcm. Micro fuse... RE: Mazda 6 2008 BCM problem - PierreTheron - 22-12-2017 (08-12-2017, 07:24 AM)Mex165 Wrote: There is only one for locks and trunk. If you trace pcb inputs/outputs according to wiring diagram to the faulty double relay you might be able to solve it .. |