+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Solved ✔ Kangoo 2014 correction (/showthread.php?tid=29339)
Kangoo 2014 correction - kingdomdz - 28-10-2017
Hi.
Please i need correction for kangoo 2014 dash 93c76
old : 158314
new: 99000
i try to read both 93c76 and 93c76 8 bits
RE: Kangoo 2014 correction - nikz - 28-10-2017
(28-10-2017, 11:18 AM)kingdomdz Wrote: Hi.
Please i need correction for kangoo 2014 dash 93c76
old : 158314
new: 99000
i try to read both 93c76 and 93c76 8 bits
here is your file
RE: Kangoo 2014 correction - kingdomdz - 28-10-2017
After flashing and trying to read again no chip detected !!! strange
RE: Kangoo 2014 correction - kingdomdz - 28-10-2017
Update: the eeprom was damaged i don't know how !! i replaced it and everything was working fine
thank you +1
i have one question about eeprom this was my last piece of 93c76 can i replace it with other serial for example 93c86 or 93c66 ?
RE: Kangoo 2014 correction - einet - 28-10-2017
Heat is a problem with eeprom
RE: Kangoo 2014 correction - alfabit - 29-10-2017
(28-10-2017, 16:38 PM)kingdomdz Wrote: 93c76 can i replace it with other serial for example 93c86 or 93c66 ?
yes, 93c76 is 1k x 8 size, 93c86 is 2k x 8 size, so you can install 93c86 instead of 93c76 you write the same info twice in 93c86 taken from 93c76
93c66 is smaller ( 512b x8 ) than 93c76 so you can`t replace, info not accomodates inside