+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Renault kangoo 2002 1.9dci immo off (/showthread.php?tid=29600)
Renault kangoo 2002 1.9dci immo off - dule-p - 05-11-2017
I have problem with Kangoo 2002 1.9dci problem with immobiliser. Does not recognize key. I make second key by dump, do not recognize it too.
ECU number is 0 281 010 894 with eeprom 5p08c3 inside.
Is it posible to do immo off without emulator?
Here are pictures and ecu eeprom dump.
RE: Renault kangoo 2002 1.9dci immo off - CHIKODIAG - 05-11-2017
HI
try to remove the eprom from the ecu and start your car
let mi know the resolt
good luck
RE: Renault kangoo 2002 1.9dci immo off - mar.wo - 05-11-2017
(05-11-2017, 13:06 PM)dule-p Wrote: I have problem with Kangoo 2002 1.9dci problem with immobiliser. Does not recognize key. I make second key by dump, do not recognize it too.
ECU number is 0 281 010 894 with eeprom 5p08c3 inside.
Is it posible to do immo off without emulator?
Here are pictures and ecu eeprom dump.
Hi
check it,please
RE: Renault kangoo 2002 1.9dci immo off - raffy haddad - 05-11-2017
Hello
Did you precode the transponder before you program it ?
If yes change transponder to new one virgin
Good luck
RE: Renault kangoo 2002 1.9dci immo off - dule-p - 06-11-2017
(05-11-2017, 17:27 PM)CHIKODIAG Wrote: HI
try to remove the eprom from the ecu and start your car
let mi know the resolt
good luck
I remove eeprom, and car start 2 times, and after that in meausring blocks "IMMOBILIZER ACTIVE", and that's it. Car won't start again
(05-11-2017, 18:00 PM)mar.wo Wrote:(05-11-2017, 13:06 PM)dule-p Wrote: I have problem with Kangoo 2002 1.9dci problem with immobiliser. Does not recognize key. I make second key by dump, do not recognize it too.
ECU number is 0 281 010 894 with eeprom 5p08c3 inside.
Is it posible to do immo off without emulator?
Here are pictures and ecu eeprom dump.
Hi
check it,please
When I write this dump, car won't start at all. Should I disconect something?
(05-11-2017, 18:31 PM)raffy haddad Wrote: Hello
Did you precode the transponder before you program it ?
If yes change transponder to new one virgin
Good luck
I put NEW transponder in programer, but in measuring blocks in IMMO shows "NO KEY - NO TRANSPONDER". Same thing with old key
----------------------------------------------
I found emulator, conect it as on diagram, reprogram eeprom, remove some resistor on ecu board, and car starts 20 times and same problem again. Leave the car for some time, and car starts again. I will burn it, I swear
RE: Renault kangoo 2002 1.9dci immo off - CHIKODIAG - 06-11-2017
HI
you need a patience to complet your job we have thos setiations all time
whene you get no keys in your immo box check your wairing from immo box to the ignotion coile
what i know whene you remove the eprom the car start all time in your car there is a wairings fault same where or same think worong in ecu or immo box
get a
and same musec relax and you will solve your problemgood luck
RE: Renault kangoo 2002 1.9dci immo off - mar.wo - 06-11-2017
(06-11-2017, 13:28 PM)dule-p Wrote:Time to time is the same problem when we try to fix remotely.(05-11-2017, 17:27 PM)CHIKODIAG Wrote: HI
try to remove the eprom from the ecu and start your car
let mi know the resolt
good luck
I remove eeprom, and car start 2 times, and after that in meausring blocks "IMMOBILIZER ACTIVE", and that's it. Car won't start again
(05-11-2017, 18:00 PM)mar.wo Wrote:(05-11-2017, 13:06 PM)dule-p Wrote: I have problem with Kangoo 2002 1.9dci problem with immobiliser. Does not recognize key. I make second key by dump, do not recognize it too.
ECU number is 0 281 010 894 with eeprom 5p08c3 inside.
Is it posible to do immo off without emulator?
Here are pictures and ecu eeprom dump.
Hi
check it,please
When I write this dump, car won't start at all. Should I disconect something?
(05-11-2017, 18:31 PM)raffy haddad Wrote: Hello
Did you precode the transponder before you program it ?
If yes change transponder to new one virgin
Good luck
I put NEW transponder in programer, but in measuring blocks in IMMO shows "NO KEY - NO TRANSPONDER". Same thing with old key
----------------------------------------------
I found emulator, conect it as on diagram, reprogram eeprom, remove some resistor on ecu board, and car starts 20 times and same problem again. Leave the car for some time, and car starts again. I will burn it, I swear
RE: Renault kangoo 2002 1.9dci immo off - dule-p - 06-11-2017
(06-11-2017, 19:09 PM)mar.wo Wrote: Time to time is the same problem when we try to fix remotely.
It's K-line ecu. Old ecu 3 plugs. But, thx anyway
RE: Renault kangoo 2002 1.9dci immo off - mar.wo - 06-11-2017
(06-11-2017, 20:35 PM)dule-p Wrote:No problem, one moment please(06-11-2017, 19:09 PM)mar.wo Wrote: Time to time is the same problem when we try to fix remotely.
It's K-line ecu. Old ecu 3 plugs. But, thx anyway
RE: Renault kangoo 2002 1.9dci immo off - dule-p - 06-11-2017
If someone need