ODIS 4.2.3 does not recognize VAS6154 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: ODIS 4.2.3 does not recognize VAS6154 (/showthread.php?tid=29689) Pages:
1
2
|
ODIS 4.2.3 does not recognize VAS6154 - georgia55 - 08-11-2017 I have ordered a VAS 6154 SP308, everything installed WIN 7 32bit ODIS 4.2.3 works fine only interface does not recognize. It does install, it does not show VAS5054A in device Maneger, it only shows COM1. I also tried via WLAN, but also without success. Can someone help me? RE: ODIS 4.2.3 does not recognize VAS6154 - marour - 08-11-2017 (08-11-2017, 15:02 PM)georgia55 Wrote: I have ordered a VAS 6154 SP308, everything installed WIN 7 32bit ODIS 4.2.3 works fine only interface does not recognize. It does install, it does not show VAS5054A in device Maneger, it only shows COM1. VAS 6154 has to be connected to the car. RE: ODIS 4.2.3 does not recognize VAS6154 - georgia55 - 08-11-2017 Yes, I did too, but Odis does not recognize ignition RE: ODIS 4.2.3 does not recognize VAS6154 - admiral - 08-11-2017 (08-11-2017, 17:36 PM)georgia55 Wrote: Yes, I did too, but Odis does not recognize ignition try win 64 bit,,,,,, RE: ODIS 4.2.3 does not recognize VAS6154 - apoelistas - 08-11-2017 You need open configuration to select your hardware in odis (will read your vcx6154 hardware id). Then it will be recognised. Dont try x64. RE: ODIS 4.2.3 does not recognize VAS6154 - marour - 08-11-2017 When install ODIS, you must choose 5054A not 6154 Or change it in the configuration. RE: ODIS 4.2.3 does not recognize VAS6154 - georgia55 - 08-11-2017 (08-11-2017, 18:01 PM)marour Wrote: When install ODIS, you must choose 5054A not 6154 yes, I did that too, at the beginning I chose VAS6154, but to no avail (08-11-2017, 18:01 PM)apoelistas Wrote: You need open configuration to select your hardware in odis (will read your vcx6154 hardware id). Then it will be recognised. Can you tell me how can I do that? RE: ODIS 4.2.3 does not recognize VAS6154 - marour - 08-11-2017 (08-11-2017, 18:18 PM)georgia55 Wrote:(08-11-2017, 18:01 PM)marour Wrote: When install ODIS, you must choose 5054A not 6154 5054A not 6154 RE: ODIS 4.2.3 does not recognize VAS6154 - georgia55 - 08-11-2017 (08-11-2017, 17:58 PM)admiral Wrote:(08-11-2017, 17:36 PM)georgia55 Wrote: Yes, I did too, but Odis does not recognize ignition I still have ETKA 8.0 and it works very well under 32 bit. RE: ODIS 4.2.3 does not recognize VAS6154 - apoelistas - 08-11-2017 (08-11-2017, 18:18 PM)georgia55 Wrote: Can you tell me how can I do that? Right hand Configure Select your vas (Try both vas5054a and vas6154) Change Select Change Something like that |