+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Solved ✔ Help Peugeot 308 DPF off (/showthread.php?tid=29725)
Help Peugeot 308 DPF off - Kenny - 09-11-2017
Hi
Equipment part no. 96 539 589 80
Equipment additional reference 96 642 575 80
Software reference 96 665 040 80
Can someone please assist with FAP/DPF off.
I tried with free software on forum but i am still having a problem.
With the file done with dpf remover i have no faults in engine ecu.
When starting it says additive low.
With the file loaded i cant seem to go into configurations at all.
When i do additive filling on diagbox it says done but same error.
Do i need to unplug anything?
Can someone check file and see if its ok?
Thanks
RE: Help Peugeot 308 DPF off - benii75 - 10-11-2017
Your file, first reset your dpf soot with diagnostic tool then flash the file and check is problem is gone
RE: Help Peugeot 308 DPF off - Kenny - 10-11-2017
Thanks for the file.
I actually came right with my file with a bit of ingenuity.
I put original file back.
Done reset fluid etc.
Read a new file and ran it through DPF remover 2017.
Wrote new file to ecu.
No faults in engine ecu but when i started the car warning for additive level came on dash.
I then went to bsi config.
Ecu's present i changed additive ecu to absent.
Then in vehicle config engine i changed additive pump to absent .
So far so good.
No faults on dpf or additive systems.
Thanks again for file and assistance.
RE: Help Peugeot 308 DPF off - benii75 - 10-11-2017
That's good my friend have i nice day
