Solved ✔ Kawasaki z1000 2006y. - need match KEYs to DUMP - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Solved ✔ Kawasaki z1000 2006y. - need match KEYs to DUMP (/showthread.php?tid=29763) |
RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - raffy haddad - 14-11-2017 What tool do you have as programmer and key reader programmer Regards (14-11-2017, 08:04 AM)raffy haddad Wrote: What tool do you have as programmer and key reader programmerdo you have a transponder programmer ? please put this file in eeprom and program 4d transponder or tpx2 pg1 FF pg2 05 pg3 A6F76601 pg4 0201000000 and report regards if that does not work be patient i will do my best to help you please report RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - number7 - 14-11-2017 Thanks for Yours help. X-PROG + ZED-BULL I'm wondering how diagnose this bike. I saw connector but what tool do I need to diagnose it? RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - raffy haddad - 14-11-2017 I have motorscan for bikes diagnose With zedbull you need tpx2 and program transonder with the 4 pgs i gave you and try P.s your both files 8and 16 not recongnised with my key maker And i sent them report to the author So i had to try it with other ecu number and gave me the last File with transponder data Please try and report RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - raffy haddad - 14-11-2017 Hello your key transponder should be 4d62 and not 60 RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - number7 - 14-11-2017 (14-11-2017, 13:50 PM)raffy haddad Wrote: Hello your key transponder should be 4d62 and not 60 Yes - I know. But I was told that it works on 4D60 I tried to change codes in transponder's. pg2 was changed sucessfully... pg3 I'm not able to change becouse is LOCKED. pg4 isn't LOCKED but when I tried to change it, it's written that SUCESSFULLY, but after reading is 0000000000 instead of 0201000000. I tried to make it as 4D62 and now my device read it as 4D62 instead of 4D60. Now ZED_BULL shows: First KEY: TYPE: 4D 62 Crypto WR INFO: DST L*L* RESP: AB41F8 98D8D2 DATA: FF 05 85BC1E85 Secound KEY: TYPE: 4D 62 Crypto WR INFO: DST L*LL RESP: AB41F8 98D8D2 DATA: FF 05 85B49185 RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - raffy haddad - 14-11-2017 Hello it is ok Do you have tpx2 transponder or new 4d clonable If yes write these data again Pg1 FF Pg2 05 Pg3 667F8E0C Pg4 keep it 00000000000 And try I can not extract the pg4 But try it anyway because these are 100% key data Regards RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - number7 - 14-11-2017 Yes - it's TPX2 transponder. But I think You made a mistake in file "kawa try". Becouse in file is code "85BC1E01" instead of "85BC1E85" In VVDI file I saw KEY mask in 1C0 line. It's XOR. I think it should look's like that: RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - raffy haddad - 14-11-2017 Yes i made mistake and vvdi file i was sure it is wrong Please return orig file as 16 bit to eeprom and program transponder as i gave. You in last post It is 100% Regards And waiting for good news RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - number7 - 14-11-2017 I think in line 0B0 is secound KEY and in line 170 secound KEY MASK I cannot program my transponder's becouse are LOCKED. I will try file "kawa try v2" with my transponder DATA and will report RE: Kawasaki z1000 2006y. - need match KEYs to DUMP - raffy haddad - 14-11-2017 (14-11-2017, 16:43 PM)number7 Wrote: I think in line 0B0 is secound KEY and in line 170 secound KEY MASK The problem with zedbull and tpx2 Are zed bull accept tpx2 and tpx2 it will be locked If you have another tool to program transponder use cn2 it is rewritable Regards |