How to make w212 Speedometer virgine - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63) +---- Thread: How to make w212 Speedometer virgine (/showthread.php?tid=3003) |
How to make w212 Speedometer virgine - darksool - 10-03-2014 Hi, i have a w212 used speedometer build in my car all is working without Total mileage how to make it virgine ? i have Xentry, DAS and Vediamo RE: How to make w212 Speedometer virgine - shawn_xiao - 31-03-2014 Hi, I think your opinion is not permit in the case of the official the Mercedes-Benz vehicle have two place store the total mileage,CGW and instrument, and the mileage data will be automatically covered to another which larger I don't think your equipment can do this! RE: How to make w212 Speedometer virgine - mercis - 31-03-2014 (10-03-2014, 19:25 PM)darksool Wrote: Hi,avdi or fvdi or must eeprom read to 0km written and with xentry coding to eis RE: How to make w212 Speedometer virgine - Mrpromega - 31-03-2014 Hi I've done a w209 cluster, i think that r the same To restore the dash to 0 km u'll have to put the dump of dush with FF that from the lone 000 to 003 And the 4 fist bits of the line 40 u write the ssid of ur eis and the job is done If u don't write the ssid in the line 40, the dush will display ( ------ ) Goood luck RE: How to make w212 Speedometer virgine - jiangky32978 - 02-04-2014 (10-03-2014, 19:25 PM)darksool Wrote: Hi, how many mileage in IC how many mileage in EIS you konw the mileage store in IC must match with EIS, otherwise the IC doesnot show total mileage |